Delphi TC2380 rear lower ball joint for the 2017 Mercedes-Benz G550 4X4 and other vehicles connects a suspension arm to the wheel knuckle and pivots as the suspension moves. This Delphi ball joint, also called a suspension ball joint, is tested for OE performance.
- Forged construction for strength and smooth operation
- Chloroprene rubber boot for durability and protection against premature failure
- Machined to micron tolerances for durable, smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC2380 ball joint
- Also called: suspension ball joint
- Fits: 2017 Mercedes-Benz G550 4X4 and other vehicles
- Position: Rear lower
- Condition: New
A clunk over bumps, uneven tire wear or a torn rubber boot can mean a ball joint is worn. These signs alone do not prove this part is the problem, since a worn control arm bushing can make a similar knock. Rear lower ball joints on both sides are normally replaced together, and this listing is one ball joint.
Fits
The vehicles it fits include the 2017 Mercedes-Benz G550 4X4, the 2006-2012 Mercedes-Benz R350, which takes two, and the 2007-2012 Mercedes-Benz GL450.
Specifications
Fit and size
- Position: Rear lower
- Quantity per vehicle: 2
Build and materials
- Boot: chloroprene rubber
- Corrosion protection: anti-corrosion protection on each part
- Condition: New
Interchange: 101-6976 · 164 352 01 27 · 164 352 03 27 · A164 352 0127 · A164 352 0327
BJ06087 · KBJ4209 · BJ28655 · BJ28655PR · K500106 · MS10548 · JBJ802
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-6976, BJ06087, KBJ4209, BJ28655, BJ28655PR, K500106, 164 352 01 27, 164 352 03 27, A164 352 0127, A164 352 0327, MS10548, JBJ802
Frequently Asked Questions
Is the Delphi TC2380 a Mercedes GL450 ball joint for 2007-2012 models?
Yes. Delphi TC2380 fits the 2007-2012 Mercedes-Benz GL450 as a rear lower ball joint, two per vehicle. Owners of other Mercedes-Benz models can look up their car in the "Vehicles it fits" section.
Does the Delphi TC2380 fit the 2017 Mercedes-Benz G550 4X4?
Yes. Delphi TC2380 is listed for the 2017 Mercedes-Benz G550 4X4 as a rear lower ball joint, and that vehicle takes two.
What is the boot on the Delphi TC2380 ball joint made of?
The boot is chloroprene rubber. It is used to improve durability and help prevent premature failure of the joint.
What noise does a worn rear lower ball joint make?
A dull clunk or knock from the rear over bumps or rough pavement can mean wear in the joint. A cracked or torn rubber boot is another sign you can see on a parked car.
Does the Delphi TC2380 ball joint go through salt spray testing?
Yes. The part is exposed to 720 hours of salt spray and tested to withstand temperatures below -40 degrees C and over 120 degrees C.
