Delphi Suspension Control Arm and Ball Joint Assembly TC1007
Delphi Suspension Control Arm and Ball Joint Assembly TC1007

Front Left Lower Control Arm with Ball Joint for 2000-2005 Toyota MR2 Spyder & More - Delphi TC1007

Be the first to review this product
$109.99
WARNING:California Proposition 65▾
MPN: TC1007
UPC: 689604250389
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Ask an Expert
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1007
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1007
$109.99

Delphi TC1007 front left lower control arm with ball joint for the 2000-2005 Toyota MR2 Spyder and other vehicles links the wheel to the chassis. This Delphi control arm, also called a control arm and ball joint assembly, comes with the ball joint attached.

  • Withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
  • 100% crack detection and ultrasonic flaw detection on every control arm
  • Ball studs machined to micron tolerances for durability and smooth joint operation
  • Robot welding for consistent performance and quality
  • Anti-corrosion protection applied to each part

Quick facts

  • Part: Delphi TC1007 control arm with ball joint
  • Also called: control arm and ball joint assembly
  • Fits: 2000-2005 Toyota MR2 Spyder and other vehicles
  • Position: Front left lower
  • Condition: New

A clunk over bumps, loose steering or uneven front tire wear can mean this arm or its ball joint is worn, though a worn tie rod end or sway bar link can produce those signs too, so find the cause before replacing anything.

Fits

Other vehicles that take it include the 2004 Scion xA and the 2004 Scion xB. If your car is not named here, look it up on the Buyer's Guide tab before you order. This listing is one arm for the front left, with one on each side of the axle; the front right is a separate part, and both are normally replaced together.

Specifications

Fit and size

  • Position: Front left lower
  • Sold as: one arm per listing

Build and materials

  • Type: control arm with ball joint assembly
  • Construction: robot-welded
  • Corrosion protection: anti-corrosion protection on each part
  • Condition: New

Interchange: 101-4762 · 101-4763 · 101-7695 · 101-7715 · 102-4762 · 520-431 · 48069-19155 · 48069-19156 · 48069-59035
KSC6021 · CB74013 · CB74013PR · CK620365 · K500118 · RK620365 · RK621301 · CMS86100 · GS86100 · MK90310 · JTC991

This part cross-references / interchanges with the following part numbers:

101-4762, 101-4763, 101-7695, 101-7715, 102-4762, 520-431, KSC6021, CB74013, CB74013PR, CK620365, K500118, RK620365, RK621301, CMS86100, GS86100, MK90310, JTC991, 48069-19155, 48069-19156, 48069-59035

Frequently Asked Questions

Can I use these MR2 Spyder control arms on a 2000-2005 Toyota MR2 Spyder?

Yes. Delphi TC1007 is the front left lower control arm with ball joint for the 2000-2005 Toyota MR2 Spyder. The right side takes its own separate arm.

How are the ball studs on this Delphi arm made?

The ball studs are machined to micron tolerances for durability and smooth joint operation. Every control arm also gets 100% crack detection and ultrasonic flaw detection.

Is 48069-19155 a number that Delphi TC1007 replaces?

Yes. 48069-19155 is on the Interchange line for Delphi TC1007, alongside 48069-19156 and 48069-59035.

Does the Delphi TC1007 come with the ball joint already attached?

Yes. This front left lower arm is a control arm with ball joint assembly, so the joint is part of the piece.

How is the corrosion protection on this control arm tested?

Delphi parts are exposed to 720 hours of salt spray and withstand temperatures below -40 degrees C and over 120 degrees C. Anti-corrosion protection is applied to each part.

Related Products

!