Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2184
$82.99
(You save)
Help keep steering steady up front with the Delphi control arm and ball joint assembly, MPN TC2184. This is a direct-fit 2011-2012 Ford Fiesta control arm that mounts in the front left lower position, locating the wheel and letting the suspension travel while the integrated ball joint allows steering and articulation. It drops in as a direct-fit replacement for the 2011-2012 Ford Fiesta (see the Buyer's Guide tab for engine coverage).
OE-validated durability: tested to the extreme for OE performance — parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt-spray exposure, with extensive dimensional and material analysis for OE-to-aftermarket compatibility.
100% inspected: every control arm undergoes crack detection and ultrasonic flaw detection so materials match OE specifications.
Precision ball studs: the ball studs are machined to micron tolerances for durability and smooth joint operation.
Robot-welded & protected: robotic welding delivers consistent quality, and anti-corrosion protection is applied to each part for corrosion prevention and enhanced appearance.
Worn signs this 2011-2012 Ford Fiesta lower arm may need replacing include clunking over bumps from the front, loose or wandering steering, uneven tire wear, and a torn or leaking ball joint boot. If a worn front left lower arm or its ball joint is the cause, this assembly replaces it. Replace and align per the vehicle service procedure.
Frequently Asked Questions
What is this Delphi TC2184 assembly?
It's a front left lower control arm with an integrated ball joint. The arm locates the wheel and lets the suspension travel, while the ball joint allows steering and articulation.
Does the TC2184 fit the 2011-2012 Ford Fiesta?
It's a direct-fit replacement for the 2011-2012 Ford Fiesta in the front left lower position. Check the Buyer's Guide tab to confirm engine coverage for your exact vehicle.
What position does this control arm cover?
This assembly is the front left (driver-side) lower control arm. It's sold individually for that one corner; replacing both sides together is recommended, and the opposite side is sold separately.
How is this Delphi control arm tested?
It undergoes 100% crack detection and ultrasonic flaw detection so materials match OE specifications, and it's validated across temperatures from below -40°C to over 120°C plus 720 hours of salt spray.
What are signs this lower control arm needs replacing?
Watch for front-end clunking over bumps, loose or wandering steering, uneven tire wear, or a torn ball joint boot. Diagnose the cause first, since these signs can have other sources.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2184
Help bring back a steady, connected feel to the front end by replacing a worn 1996-2000 Honda Civic control arm with the Delphi TC1075, a front right upper control arm with ball joint that installs...
Keep your front suspension linked to the chassis with the Delphi control arm TC1043, a front left upper control arm and ball joint assembly whose built-in ball joint lets the wheel pivot for steering...
Help keep your steering straight and your front suspension tight with the Delphi Suspension Control Arm and Ball Joint Assembly, TC3751 — a direct-fit 2006-2011 Honda Civic control arm, also listed...
Keep the front wheel properly located as the suspension travels with the Delphi control arm TC5439, a front left upper control arm with ball joint that pairs both parts in one unit. It fits many...
Refresh worn rear suspension with the Delphi control arm assembly TC5994, a rear lower forward control arm and ball joint assembly that drops in as a direct-fit replacement for the 2006-2012 Hyundai...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
