Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1346
Delphi TC3237 front left lower control arm with ball joint for the 2001-2006 Mitsubishi Montero connects the front left wheel to the chassis. This Delphi control arm has the ball joint built into the assembly.
A clunk over bumps, uneven tire wear or loose steering can mean the arm or its ball joint is worn, though a tie rod end or a sway bar link can be behind the same signs, so find the cause before buying. If the control arm and ball joint assembly is the cause, this part replaces both in one piece. This listing is one arm for the front left; the front right is a separate part, and both sides are normally replaced together.
This control arm for the 2001-2006 Mitsubishi Montero is a direct-fit replacement for the front left lower position. That side takes one arm.
Fit and size
Build and materials
Interchange: 522-429
KSC5574 · KSC5576 · CB67093 · CB67093PR · CK621624 · K621624 · RK621624 · CMS80157 · MR496795
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Delphi TC3237 control arm right for the 2001-2006 Mitsubishi Montero?
Yes. Delphi TC3237 is a front left lower control arm with ball joint for the 2001-2006 Mitsubishi Montero.
Is this Delphi control arm for the left or right side?
This control arm is the front left lower one. The front right side is a separate part and is ordered on its own.
Does the Delphi TC3237 include the ball joint?
Yes. The ball joint is part of the Delphi TC3237 assembly, so the arm and joint come as one piece. Its ball stud is machined to micron tolerances.
How is this lower control arm tested for heat, cold and rust?
The parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti Corrosion protection is applied to each part.
Are these Delphi control arms checked for cracks and welded by robot?
Yes. Delphi control arms undergo 100% crack detection and ultrasonic flaw detection, and robot welding is used for consistent performance and quality.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.