Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC7247
Delphi TC3372 front left upper control arm with ball joint for the 1997-2004 Mitsubishi Montero Sport and other vehicles links the left front wheel to the suspension. Sold as a control arm and ball joint assembly, it lets the wheel move up and down and pivot as you steer.
A clunk over bumps, loose-feeling steering or uneven front tire wear can come from a worn ball joint. Worn tie rod ends, sway bar links or shocks can be behind these signs too, so find the cause before you buy.
This control arm fits the 1997-2004 Mitsubishi Montero Sport and the 1994-2000 Mitsubishi Montero in the front left upper position. This listing is one arm for the front left; the front right upper arm is a separate part, and both are normally replaced together on that axle.
Fit and size
Build and materials
One front left upper control arm with ball joint. The front left takes one, and the right side is ordered separately.
Interchange: 102-6573 · 520-893 · 521-307
KSC5593 · CB67157 · CB67157PR · RK620655 · CMS80126 · GS80126 · MR124879 · MR296093 · MR296095 · JTC852
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Delphi TC3372 right for the 1994-2000 Mitsubishi Montero?
Yes. Delphi TC3372 is a front left upper control arm with ball joint, and it fits the 1994-2000 Mitsubishi Montero in that position.
Does the Delphi TC3372 come with the ball joint already on the arm?
Yes. The ball joint is part of the assembly, so Delphi TC3372 is one front left upper control arm with ball joint. The right side is a separate part.
How are the ball studs made on this control arm?
The ball studs are machined to micron tolerances for durability and smooth joint operation. The control arm itself is robot-welded for consistent performance and quality.
What signs can a worn front upper ball joint show?
Signs can include a clunk over bumps, loose-feeling steering or uneven front tire wear. A shop can check ball joint play, since that check needs the vehicle raised.
How is this Delphi control arm tested for heat, cold and rust?
It withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.