Delphi TC4692 front right upper control arm with ball joint for the 2022-2025 BMW M8 and other vehicles holds the front right wheel carrier to the chassis and lets the wheel pivot through suspension travel. Sold as a control arm and ball joint assembly, it replaces the arm and its joint in one piece.
- Withstands temperatures below -40 degrees C and over 120 degrees C
- Exposed to 720 hours of salt spray in testing
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC4692 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: the 2022-2025 BMW M8 and other vehicles
- Position: Front right upper
- Condition: New
A clunk over bumps, loose steering or uneven front tire wear can mean the arm or its ball joint is worn. If a worn arm is the cause, this assembly replaces it, but tie rods, struts and other suspension parts can give similar signs. With the engine off, look for cracks in the arm or a torn joint boot first, and leave play testing to a shop.
Fits
It fits the 2022-2025 BMW M8, the 2020-2025 BMW M8 Gran Coupe and the 2018-2023 BMW M5, and each takes one on the front right. This listing is a single arm; the front left is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Front right upper
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection
- Condition: New
Interchange: 31 10 8 053 332
Frequently Asked Questions
Is this the control arm for the 2018-2023 BMW M5?
Yes. Delphi TC4692 is the front right upper control arm with ball joint for the 2018-2023 BMW M5, and that position takes one.
Does this Delphi control arm come with the ball joint?
Yes. The ball joint is part of this assembly, so the arm and its joint are replaced as a single unit.
How are the ball studs on the TC4692 made?
Delphi machines the ball studs on the TC4692 to micron tolerances for durability and smooth joint operation.
What does a worn front right upper control arm feel like?
A clunk over bumps, loose or wandering steering, or uneven front tire wear can mean the arm or its ball joint is worn.
Is 31 10 8 053 332 the same as this Delphi arm?
Yes. 31 10 8 053 332 is listed as an interchange number for this front right upper control arm, Delphi TC4692.
