Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC994
Delphi TC3549 front right upper control arm with ball joint for the 2014-2024 Jaguar F-Type and other vehicles locates the wheel as the suspension moves. The ball joint is attached, so this control arm and ball joint assembly replaces both in one piece.
A worn arm or ball joint can show up as a clunk over bumps, uneven tire wear or a loose feel in the steering. Other suspension parts can produce those too, so with the engine off, look over the visible bushings and ball joint boot for cracks, tears or leaking grease before you replace anything, and leave play testing to a shop. This listing is one control arm for the front right; the front left is a separate part, and the two are normally replaced together.
The vehicles it fits include the 2014-2024 Jaguar F-Type, the 2010-2019 Jaguar XJ and the 2018-2019 Jaguar XJR575, along with a wide range of other Jaguar, Lincoln and Ford models. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Fit and size
Build and materials
Interchange: 102-7187 · 623.61131 · 521-430
C2D2474 · C2D36804 · XR81763 · XR852090 · KSC5120 · CB85198 · CK621666 · RK621666 · CMS101496 · CMS40121 · GS40121 · JTC1375
This part cross-references / interchanges with the following part numbers:
Does this Delphi TC3549 front right upper control arm fit the 2014-2024 Jaguar F-Type?
Yes. Delphi TC3549 is listed for the 2014-2024 Jaguar F-Type in the front right upper forward position. For other cars, open the "Vehicles it fits" section and look up your model and engine.
Is this XJ control arm right for the 2010-2019 Jaguar XJ?
Yes. The 2010-2019 Jaguar XJ is on the fitment list for this front right upper control arm with ball joint, which is sold as a single piece.
What testing is behind this Delphi control arm?
Delphi TC3549 withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. Each arm also gets 100% crack detection and ultrasonic flaw detection.
Does the ball joint come attached to this control arm?
Yes. This is a control arm with ball joint in one piece, and the ball studs are machined to micron tolerances for smooth joint operation.
Is Delphi TC3549 the same as part number 102-7187?
Yes. 102-7187 is one of the other numbers this control arm replaces, along with 521-430 and CB85198.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.