Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1666
Delphi TC4028 front left lower control arm with ball joint for the 2007-2021 Toyota Tundra and other vehicles links the front left wheel to the suspension and lets the wheel pivot. Also sold as a control arm and ball joint assembly, it brings the arm and the joint together in one piece.
Clunks over bumps, wandering steering or uneven tire wear can come from a worn control arm or ball joint. Worn tie rod ends, sway bar links or struts can be behind these signs too, so find which part is at fault before you buy.
It fits the 2007-2021 Toyota Tundra and the 2008-2022 Toyota Sequoia, with one arm on each side of the front axle. This listing is the left one; the right is a separate part ordered on its own, and the two are normally replaced together.
Fit and size
Build and materials
Interchange: 102-8081 · 48069-09090 · 48069-0C020
RK621304 · CMS86136
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Delphi control arm for the left or right side?
It is the left side. Delphi TC4028 is the front left lower control arm, and the front right is a separate part that is ordered on its own.
Is Delphi TC4028 the lower control arm for the 2007-2021 Toyota Tundra?
Yes. Delphi TC4028 is a front left lower control arm with ball joint for the 2007-2021 Toyota Tundra, and it also fits the 2008-2022 Toyota Sequoia.
Does this 2007-2021 Toyota Tundra control arm also fit the 2008-2022 Toyota Sequoia?
Yes. The same front left lower arm fits the 2008-2022 Toyota Sequoia, and each side of the front axle takes one.
What corrosion protection does this control arm have?
Anti-corrosion protection is applied to each part. In testing, Delphi parts are exposed to 720 hours of salt spray and withstand temperatures below -40 degrees C and over 120 degrees C.
What inspection do Delphi TC4028 control arms get for cracks?
Delphi control arms undergo 100% crack detection and ultrasonic flaw detection. The ball studs are machined to micron tolerances for smooth joint operation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.