Delphi TC5637 front left lower control arm with ball joint for the 1999-2004 Honda Odyssey connects the left front wheel to the body and lets the suspension move. This control arm and ball joint assembly also gives the steering knuckle its pivot point.
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for smooth joint operation
- Robot-welded control arm for consistent quality
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC5637 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1999-2004 Honda Odyssey
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven tire wear or a wandering feel can mean a worn arm or ball joint, though worn tie rods or struts can produce similar signs. With the engine off, look at the front tire edges for uneven wear and note when the noise happens; a shop can test the joint for play before you order.
Fits
It is a direct-fit replacement for the 1999-2004 Honda Odyssey control arm with ball joint on the front left lower side. The 1999-2004 Honda Odyssey takes one on this side; the front right is a separate part ordered on its own, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1
Build and materials
- Construction: robot-welded control arm with ball joint
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied to each part
- Condition: new
Interchange: 102-5684 · 623.40012 · 521-351 · 51360-S0X-A02
51360S0XA00 · 51360S0XA01 · CB59003 · CB59003PR · CK620326 · RK620326 · CMS60103 · GS60103 · JTC1808
This part cross-references / interchanges with the following part numbers:
102-5684, 623.40012, 521-351, 51360S0XA00, 51360S0XA01, 51360-S0X-A02, CB59003, CB59003PR, CK620326, RK620326, CMS60103, GS60103, JTC1808
Frequently Asked Questions
Does the Delphi TC5637 fit the 1999-2004 Honda Odyssey?
Yes. Delphi TC5637 is the front left lower control arm with ball joint for the 1999-2004 Honda Odyssey. This listing covers the left side only.
What corrosion protection does this Delphi control arm have?
Anti-corrosion protection is applied to each part. Delphi also exposes its parts to 720 hours of salt spray in testing.
How are the ball studs on this control arm made?
The ball studs are machined to micron tolerances for smooth joint operation. The arm itself is robot welded and gets 100% crack and ultrasonic flaw detection.
Could a clunk over bumps come from the ball joint in this control arm?
Yes. A worn ball joint or control arm can clunk over bumps or wear tires unevenly, though other front-end parts can sound similar, so a shop can test the joint for play.
Is 51360-S0X-A02 an interchange number for Delphi TC5637?
Yes. 51360-S0X-A02 is listed as an interchange number for Delphi TC5637, which is the front left lower control arm with ball joint.
