Front Right Upper Control Arm with Ball Joint for 2002-2005 Mercedes-Benz ML500 & More - Delphi TC2136

Delphi TC2136 front right upper control arm with ball joint for the 2002-2005 Mercedes-Benz ML500 and other vehicles links the front right wheel to the vehicle and lets it move with the suspension. As a control arm and ball joint assembly, it carries the joint where the wheel pivots with steering and suspension travel, and its materials match OE specifications.

• Withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray in testing
• Delphi control arms get 100% crack detection and ultrasonic flaw detection
• Ball studs machined to micron tolerances for durability and smooth joint operation
• Robot-welded construction for consistent performance and quality
• Anti-corrosion protection applied to each part

Quick facts

• Part: Delphi TC2136 control arm with ball joint
• Also called: control arm and ball joint assembly
• Fits: 2002-2005 Mercedes-Benz ML500 and other vehicles
• Position: Front right upper
• Condition: New

A worn arm or ball joint can show up as a clunk over bumps, uneven tire wear or loose, wandering steering. Before you replace this arm, rule out worn tie rods, struts and wheel bearings, which can produce similar noises or play.

Fits

It is listed for a wide range of Mercedes-Benz models, including the 2002-2005 Mercedes-Benz ML500, the 2003-2005 Mercedes-Benz ML350 and the 1998-2003 Mercedes-Benz ML320. This listing is one arm for the front right; the front left upper arm is a separate part, and the two are normally replaced together. If your model is not named here, open the Buyer's Guide tab to check your exact model and engine.

Specifications

Interchange: 101-5247 · 101-6090 · 102-6090 · MB-H122 · 521-294 · 163 333 01 01 · A163 333 0101
KSC5417 · CB28038 · CB28038PR · CK80547 · K80547 · RK80547 · 163333101 · A163333101 · CMK80547 · GK80547 · MK80547