Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC6869
Help keep the front wheel properly located as the suspension moves with the Delphi Control Arm with Ball Joint TC5737, a direct-fit replacement for the 2011-2013 Dodge Charger, the 2011-2013 Chrysler 300 and the 2011-2013 Dodge Challenger. It is cataloged for the front right lower forward position. It pairs the arm with its ball joint, linking the wheel knuckle to the chassis and giving the suspension and steering a pivot point.
Every Delphi control arm draws on the brand's OE experience, which Delphi applies across its aftermarket steering line:
Signs a control arm or its ball joint may need replacing include clunking or knocking over bumps, loose or wandering steering, uneven tire wear, and play in the ball joint. Diagnose the cause before replacing parts, and have the wheel alignment checked after installing suspension components. Whether you need a 2011-2013 Dodge Charger lower control arm or a 2011-2013 Chrysler 300 control arm for this position, see the Buyer's Guide tab for engine details.
Interchange: 622.63051 · 4670 508AD · 4670 508AE · 4670 508AF · 5168 652AA · 5168 652AB · 5168 652AC · 5290 828AD · 522-802
62263051 · 4670508AD · 4670508AE · 4670508AF · 5168652AA · 5168652AB · 5168652AC · 5290828AD · 522802 · 4670508AA · 4670508AG · 5168652AD · 68290900AC · CB81474 · CB81474PR · CK620257 · CK622224 · CMS251124 · GS251124
This part cross-references / interchanges with the following part numbers:
Which position does the Delphi TC5737 fit on the 2011-2013 Dodge Charger?
On the 2011-2013 Dodge Charger it is cataloged for the front right lower forward position. See the Buyer's Guide tab for engine details and the other listed vehicles.
What does a control arm with ball joint do?
It links the wheel knuckle to the chassis so the wheel can move up and down. The ball joint provides a pivot for steering and suspension travel.
Is the ball joint included with this control arm?
Yes. It is sold as a control arm and ball joint assembly, so the ball joint comes with the arm rather than as a separate part.
How does Delphi test this control arm?
Delphi control arms undergo 100% crack detection and ultrasonic flaw detection. Delphi parts are also tested from below -40°C to over 120°C and exposed to 720 hours of salt spray.
What are signs this part may need replacing?
Clunking over bumps, loose or wandering steering, uneven tire wear, or play in the ball joint may be signs of a worn arm or joint. Diagnose the cause before replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.