Steer with confidence using the Delphi control arm and ball joint assembly TC5785, a direct-fit front right lower replacement for the 2009-2015 Honda Pilot. This Honda Pilot control arm combines the arm, bushings, and a pre-installed ball joint into one unit that locates the wheel and lets the suspension travel while allowing the steering knuckle to pivot. If a worn or corroded original is behind clunking over bumps, loose steering, or uneven tire wear, this assembly replaces it.
A great choice as a Honda Pilot lower control arm. See the Buyer's Guide tab for engine-level fitment.
Interchange: 102-7546 · 623.40106 · 526-768 · 51350-SZA-A02 · 51350-SZA-A04 · 51350-SZA-A07
1027546 · 62340106 · 526768 · 51350SZAA02 · 51350SZAA04 · 51350SZAA07 · 51350SZAA03 · 51350SZAA05 · CB59204 · CB59204PR · RK621551 · CMS601044 · GS601044 · JTC2771
This part cross-references / interchanges with the following part numbers:
Does this Delphi assembly fit a 2011 Honda Pilot control arm application?
Yes. TC5785 is a direct-fit front right lower control arm and ball joint assembly for the 2009-2015 Honda Pilot, which includes 2011. Check the Buyer's Guide tab to confirm your exact vehicle.
What position on the vehicle is this Delphi unit for?
It is the front right (passenger side) lower unit. If you also need the opposite side, order the corresponding left assembly separately for a matched replacement.
Is the ball joint included with this arm?
Yes. The ball joint is pre-installed in the assembly, so you replace the arm, bushings, and joint together as one unit rather than pressing in a separate joint.
What are signs this part may need replacing on a 2013 Honda Pilot lower control arm?
Common signs include clunking over bumps, loose or wandering steering, and uneven front tire wear. Have the cause diagnosed, since these symptoms can stem from other worn suspension parts.
How is this Delphi control arm tested for durability?
Delphi tests to the extreme: parts withstand below -40°C and over 120°C plus 720 hours of salt spray, undergo 100% crack and ultrasonic flaw detection, and use ball studs machined to micron tolerances.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
