Delphi TC5876 rear right upper control arm with ball joint for the 2011-2013 Kia Sorento and other vehicles links the rear right wheel to the chassis and pivots through the ball joint as the suspension moves. This control arm and ball joint assembly comes as one unit, so the arm and joint are replaced together.
- Withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- Every control arm goes through 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5876 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2013 Kia Sorento and other vehicles
- Position: Rear right upper
- Condition: New
A worn ball joint or bent arm can show up as a clunk over bumps, uneven rear tire wear or a loose feel at the back of the car. A worn strut or sway bar link can make similar noises, so these signs alone do not prove the arm is at fault.
Fits
It is a direct-fit 2011-2013 Kia Sorento control arm that also fits the 2007-2012 Hyundai Santa Fe and the 2007-2012 Hyundai Veracruz. This listing is one arm for the rear right; the rear left is a separate part, and both are normally replaced together.
Specifications
Fit and size
- Position: Rear right upper
- Quantity for this position: 1
Build and materials
- Type: control arm with ball joint, one assembly
- Welding: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: New
In the box
One control arm with ball joint. The rear right upper position takes one.
Interchange: 102-7260 · 524-376 · 55240-3J100
KSC5165 · CB60578 · CB60578PR · RK622567 · RK623153 · CMS901125 · CMS90178
This part cross-references / interchanges with the following part numbers:
102-7260, 524-376, 55240-3J100, KSC5165, CB60578, CB60578PR, RK622567, RK623153, CMS901125, CMS90178
Frequently Asked Questions
Does this Delphi control arm come with the ball joint?
Yes. Delphi TC5876 is a control arm with the ball joint built in, so you order one unit. The ball studs are machined to micron tolerances.
Is this a control arm replacement for the 2011-2013 Kia Sorento?
Yes. Delphi TC5876 is a direct-fit part for the 2011-2013 Kia Sorento, in the rear right upper position.
Is this the 2007-2012 Hyundai Santa Fe control arm for the rear right?
Yes. It fits the 2007-2012 Hyundai Santa Fe in the rear right upper position; that side takes one.
What temperature and salt spray testing does this control arm go through?
These parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Does TC5876 interchange with 55240-3J100?
Yes. Delphi TC5876 lists 55240-3J100 among its interchange numbers, along with 102-7260 and 524-376.
