Delphi TC5948 front left lower control arm with ball joint for the 2000-2004 Dodge Dakota and other vehicles connects the steering knuckle to the frame and lets the wheel pivot. This Delphi control arm, also called a control arm and ball joint assembly, comes with the ball joint already in place.
- Tested below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5948 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2000-2004 Dodge Dakota and other vehicles
- Position: Front left lower
- Condition: New
A clunk over bumps, a loose feel in the steering or uneven front tire wear can mean this arm or its ball joint is worn. A worn tie rod end or sway bar link can produce similar signs, so pin down the source before you order.
Fits
It is a direct-fit control arm for the 2000-2004 Dodge Dakota and the 2000-2003 Dodge Durango. There is one arm on each side of the front axle, so replace the left and right arms together; this listing is one arm for the front left, and the front right is a separate part.
Specifications
Fit and size
- Position: Front left lower
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Corrosion protection: anti-corrosion protection applied
- Condition: New
Interchange: 622.67038 · 520-305
52106397AA · CB81173 · CB81173PR · CK620477 · RK620477 · CMS25110 · GS25110 · JBJ899 · JTC2342
This part cross-references / interchanges with the following part numbers:
622.67038, 52106397AA, 520-305, CB81173, CB81173PR, CK620477, RK620477, CMS25110, GS25110, JBJ899, JTC2342
Frequently Asked Questions
Will this control arm fit the 2000-2004 Dodge Dakota?
Yes. Delphi TC5948 is the front left lower control arm with ball joint for the 2000-2004 Dodge Dakota. The right side is a separate part.
Is the ball joint already attached on the Delphi TC5948?
Yes. Delphi TC5948 is sold as a control arm with the ball joint included, so the arm and joint come as one assembly.
How are the ball studs on this lower control arm made?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation.
What signs can a worn front lower control arm and ball joint show?
A clunk over bumps, loose steering feel or uneven front tire wear can point to a worn arm or joint. A shop can check the joint for play.
Does this front control arm have corrosion protection?
Yes. Anti-corrosion protection is applied to each part, and the arm is exposed to 720 hours of salt spray in testing.
