Delphi TC6209 front upper control arm with ball joint for the 2011-2013 Ram 2500 and other vehicles links the wheel to the frame and lets the wheel pivot on its ball joint. The ball joint comes attached to the arm as one assembly.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and over 120 degrees C, and through 720 hours of salt spray
Quick facts
- Part: Delphi TC6209 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2013 Ram 2500 and other vehicles
- Position: Front upper
- Condition: New
A worn upper control arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. These signs alone do not prove this arm is the problem, since a worn tie rod end can cause similar looseness. The left and right upper arms are normally replaced together, and this listing is a single arm.
Fits
It is listed for a wide range of Ram and Dodge Ram models, including the 2012 Ram 1500 and the 2006-2010 Dodge Ram 2500. The front axle takes one on each side. If your vehicle is not named here, search its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front upper
- Quantity per vehicle: 2
- Sold individually: 1 per listing
Build and materials
- Type: control arm with ball joint, one assembly
- Ball studs: machined to micron tolerances
- Welding: robot welded
- Finish: anti-corrosion protection
- Condition: New
Interchange: 52121 586AB · 52121 586AD · 520-199
52121586AA · 52121586AF · CB81126 · CB81126PR · CK620181 · RK620181 · CMS25168 · GS25168
This part cross-references / interchanges with the following part numbers:
52121586AA, 52121 586AB, 52121 586AD, 52121586AF, 520-199, CB81126, CB81126PR, CK620181, RK620181, CMS25168, GS25168
Frequently Asked Questions
Does the Delphi TC6209 front upper control arm fit a 2012 Ram 1500?
Yes. Delphi TC6209 is listed for the 2012 Ram 1500 at the front upper position. The vehicle takes two, one on each side.
Is a control arm and ball joint assembly the same as this TC6209 arm?
Yes. Control arm and ball joint assembly is another name for this part: one front upper arm with its ball joint attached.
How is this front upper control arm protected against rust?
Anti-corrosion protection is applied to each Delphi TC6209 arm, and Delphi tests its parts through 720 hours of salt spray.
What are the signs of a bad front upper control arm or ball joint?
A clunk over bumps, loose steering or uneven front tire wear can mean a worn arm or ball joint. Have worn front suspension checked promptly rather than driving on it.
Is the Delphi TC6209 control arm robot welded?
Yes. The Delphi TC6209 arms are robot welded, and each one goes through 100% crack detection and ultrasonic flaw detection.
