Delphi TC6802 front right lower control arm with ball joint for the 2018-2022 Jeep Compass holds the wheel to the suspension and lets it pivot on the ball joint. Also sold as a control arm and ball joint assembly, this Delphi control arm includes the ball joint.
- Control arm tested below -40 degrees C and above 120 degrees C and exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each control arm
Quick facts
- Part: Delphi TC6802 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2018-2022 Jeep Compass
- Position: Front Right Lower
- Condition: New
A clunk over bumps, uneven tire wear or loose steering can mean a worn ball joint or arm. Worn strut mounts, sway bar links or tires can be behind the same complaints, so find the cause before you buy. This listing is one arm for the front right; the front left is a separate part, and both are normally replaced together.
Fits
This lower control arm is a direct-fit replacement for the 2018-2022 Jeep Compass, for the front right side.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 for this position
Build and materials
- Construction: robot-welded control arm with ball joint
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection
- Condition: New
- Country of origin: Turkey
In the box
One control arm with ball joint. The front right side of the 2018-2022 Jeep Compass takes one, and the front left is ordered separately.
Interchange: 68318 010AD · 68318 010AG · 68429 725AA · 68429 725AB
68318010AB · 68318010AC · 68318010AE · 68318010AF · 526816 · CB96064 · CB96064PR · RK623776 · CMS251221 · CTXMS251221
This part cross-references / interchanges with the following part numbers:
68318010AB, 68318010AC, 68318 010AD, 68318010AE, 68318010AF, 68318 010AG, 68429 725AA, 68429 725AB, 526816, CB96064, CB96064PR, RK623776, CMS251221, CTXMS251221
Frequently Asked Questions
Will this front right lower arm work as a 2018-2022 Jeep Compass control arm replacement?
Yes. Delphi TC6802 is a front right lower control arm with ball joint for the 2018-2022 Jeep Compass.
Is this arm for the right or left side of the 2018-2022 Jeep Compass?
It is for the front right, in the lower position. The front left side is a separate part.
How are the ball studs on the Delphi TC6802 made?
The ball studs are machined to micron tolerances for durability and smooth joint operation.
What testing does this control arm go through?
Each arm gets 100% crack detection and ultrasonic flaw detection. The part is tested below -40 degrees C and above 120 degrees C and exposed to 720 hours of salt spray.
Is Delphi TC6802 a replacement for part number 68318010AB?
Yes. 68318010AB is one of the numbers Delphi TC6802 replaces, and it is listed on the Interchange line.
