Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC6842
Delphi TC7628 front right lower control arm with ball joint for the 2014-2020 Nissan Rogue and other vehicles links the steering knuckle to the vehicle and pivots on its ball joint as the suspension moves. Sold as a control arm and ball joint assembly, it replaces the arm and the joint together.
A clunk over bumps, loose or wandering steering and uneven tire wear can mean a worn control arm or ball joint. Before you replace this arm, rule out other worn suspension parts such as sway bar links or a strut mount, since they can give a similar clunk.
As a control arm replacement for the 2014-2020 Nissan Rogue, the 2017-2022 Nissan Rogue Sport and the 2017-2019 Nissan Qashqai, this Delphi control arm covers the front right lower position, which takes one arm. This listing is one arm; the front left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
Interchange: 102-8043 · 54500-4BA0A · 54500-4BD0A · 54500-4BD2A · 54500-4CA0A · 54500-4CU0A · 54500-5HA0A · 524-839 · 524-840
KSC5663 · KSC5709 · CB69263 · CB69264 · CB69264PR · K201633 · K201700 · K500129 · RK623111 · CMS301168 · GS301168 · MS30494
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Nissan Rogue control arm that fits the 2014-2020 model years?
Yes. Delphi TC7628 fits the 2014-2020 Nissan Rogue in the front right lower position, which takes one arm.
Can I use this as a 2015 Nissan Rogue lower control arm?
Yes. The 2015 model year falls inside the 2014-2020 Nissan Rogue fitment for Delphi TC7628, and this arm is the front right lower position.
What testing does the Delphi control arm go through?
It withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray exposure. Each arm also gets 100% crack detection and ultrasonic flaw detection.
How can I tell if the ball joint on this control arm is worn?
A clunk over bumps, loose or wandering steering and uneven tire wear can point to a worn joint. A shop can check for play, since that check needs the vehicle raised.
Does Delphi TC7628 replace Nissan number 54500-4BA0A?
Yes. 54500-4BA0A is one of the numbers this Delphi TC7628 arm replaces, along with 524-839 and KSC5663.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.