Delphi TC6842 front left lower control arm with ball joint for the 2007-2010 Volkswagen Touareg and other vehicles links the wheel to the body and lets the suspension move. It is sold as a control arm and ball joint assembly, so the ball joint comes attached to the arm.
- Withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on the control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC6842 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2007-2010 Volkswagen Touareg and other vehicles
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven front tire wear or loose steering can mean a worn ball joint or arm, but a worn part elsewhere in the suspension can make similar noises. With the engine off and the car parked, look over the arm where you can see it for cracks or bent metal, and have a shop check the ball joint for play before you replace anything.
Fits
This is a direct-fit replacement for the 2007-2010 Volkswagen Touareg, the 2010 Audi Q7 and the 2008-2010 Porsche Cayenne. The listing is one arm for the front left, which takes one; the front right is a separate part ordered on its own, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1
- Sold as: one control arm per listing
Build and materials
- Type: control arm with ball joint
- Ball studs: machined to micron tolerances
- Welding: robot welded
- Corrosion protection: anti-corrosion protection applied
- Condition: New
Interchange: 955 341 017 61
KSC4277 · CMS101392
This part cross-references / interchanges with the following part numbers:
KSC4277, CMS101392, 955 341 017 61
Frequently Asked Questions
Is this a 2007-2010 Volkswagen Touareg control arm for the front left?
Yes. Delphi TC6842 is a front left lower control arm with ball joint for the 2007-2010 Volkswagen Touareg. The right side is a separate part.
Is TC6842 a 2010 Audi Q7 control arm?
Yes. This front left lower control arm with ball joint fits the 2010 Audi Q7. The front right arm is ordered separately.
How is this Delphi control arm tested?
The Delphi TC6842 withstands temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray. Each control arm also gets 100% crack and ultrasonic flaw detection.
Are the ball studs on this control arm machined?
Yes. The ball studs are machined to micron tolerances for durability and smooth joint operation, and the arm itself is robot welded.
Does Delphi TC6842 replace KSC4277?
Yes. KSC4277 is a cross-reference number for this front left lower control arm with ball joint.
