Steer with confidence and help restore proper front suspension geometry with the Delphi control arm and ball joint assembly, MPN TC764. This Delphi control arm drops in as a direct-fit front left (driver-side) lower replacement for the 1990-1992 Volkswagen Corrado, 1985-1992 Volkswagen Golf and 1985-1992 Volkswagen Jetta.
- OE-validated testing: engineered with Delphi's OE expertise and tested to the extreme — withstanding temperatures below -40°C to over 120°C and 720 hours of salt spray, with dimensional and material analysis for OE-to-aftermarket compatibility.
- 100% inspected: every arm undergoes crack detection and ultrasonic flaw detection so materials match OE specifications.
- Precision ball studs: machined to micron tolerances for durable, smooth joint operation.
- Consistent build: robot-welded for consistent quality, with anti-corrosion protection applied for corrosion prevention and enhanced appearance.
The arm locates the front wheel and lets the suspension travel, while the integrated ball joint pivots to allow steering and vertical wheel motion. If a worn arm or ball joint is the cause of clunking on acceleration or over bumps, uneven tire wear, or loose steering, this assembly replaces it. Sold individually. Have an alignment performed after installation, and consult the vehicle service information for the correct fasteners and whether they may be reused.
Interchange: 101-6536 · 102-4072 · 102-6536 · VW-H106 · 521-085 · 507-1253 · 191 407 153A · 191 407 151B · 191 407 153
1016536 · 1024072 · 1026536 · VWH106 · 521085 · 5071253 · 191407153A · 191407151B · 191407153 · 521245 · KSC6109 · CB43183 · CB43183PR · CB69123 · RK620588 · FA4338 · CMS70116 · CMS70117 · MS30152 · MS70118 · JTC369
This part cross-references / interchanges with the following part numbers:
101-6536, 102-4072, 102-6536, VW-H106, 521-085, 521245, KSC6109, CB43183, CB43183PR, CB69123, RK620588, FA4338, CMS70116, CMS70117, MS30152, MS70118, 507-1253, 191 407 153A, JTC369, 191 407 151B, 191 407 153
Frequently Asked Questions
Will this Delphi control arm fit my 1985-1992 Volkswagen Jetta?
Yes. It is listed for the 1985-1992 Volkswagen Jetta. See the "Vehicles it fits" section for the full list of applications.
What position is this control arm?
It is the front left (driver-side) lower control arm. Order the matching part for the opposite side if you are replacing both.
Is the ball joint included with this control arm?
Yes. The ball joint is integrated into the assembly, so it installs as one unit — no separate ball joint purchase is needed.
What are signs this control arm or ball joint may need replacing?
Clunking on acceleration or over bumps, uneven front tire wear, or loose or wandering steering can point to a worn arm or ball joint. Diagnose the cause before replacing.
Do I need an alignment or new fasteners after installing this control arm?
Have a wheel alignment performed after installation. Consult the vehicle service information for the correct fasteners and whether they may be reused.
