Delphi TC8615 front left lower control arm with ball joint for the 2010-2014 Ford Mustang links the front left wheel to the chassis and pivots on its ball joint. It is sold as a control arm and ball joint assembly, so the ball joint comes attached to the arm.
- Parts withstand temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray exposure
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for smooth joint operation
- Robot-welded control arm for consistent quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC8615 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2010-2014 Ford Mustang
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven front tire wear or a loose steering feel can mean the arm or its ball joint is worn. Before you replace this arm, rule out other suspension parts that can make similar noises, such as sway bar links, a strut mount or a tie rod end.
Fits
This is a direct-fit replacement for the 2010-2014 Ford Mustang. The listing is one arm for the front left; the front right is a separate part, and both sides of that axle are normally done at the same time.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1 on this side
Build and materials
- Construction: robot-welded control arm with ball joint
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection
- Condition: New
In the box
One front left lower control arm with ball joint. The 2010-2014 Ford Mustang takes one on this side.
Interchange: 524-929 · AR3Z 3079-A · BR3Z-3079-A · BR3Z-3079-B · CR3Z-3079-A · CR3Z 3079-B · CR3Z-3079-C · CR3Z 3079-D
RK622156 · CMS401149 · X15CJ1067
This part cross-references / interchanges with the following part numbers:
524-929, AR3Z 3079-A, BR3Z-3079-A, BR3Z-3079-B, CR3Z-3079-A, CR3Z 3079-B, CR3Z-3079-C, CR3Z 3079-D, RK622156, CMS401149, X15CJ1067
Frequently Asked Questions
Does the Delphi TC8615 control arm fit the 2010-2014 Ford Mustang?
Yes. Delphi TC8615 is a front left lower control arm with ball joint for the 2010-2014 Ford Mustang. The front right side is a separate part.
Is the ball joint included with this front left lower control arm?
Yes. This arm is a control arm with ball joint, so the ball joint is part of the assembly. The listing holds one arm for the front left.
How is the Delphi TC8615 protected against rust?
Anti-corrosion protection is applied to each Delphi TC8615 arm, and Delphi parts are exposed to 720 hours of salt spray.
What can a worn front lower control arm with ball joint feel like?
A clunk over bumps, uneven front tire wear or a loose steering feel can mean a worn arm or ball joint. A shop can inspect the front suspension to confirm.
Does Delphi TC8615 replace the BR3Z-3079-A number?
Yes. BR3Z-3079-A is on the interchange list for Delphi TC8615, along with the other cross-reference numbers printed on the page.
