Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2076
Delphi TC9413 front right upper control arm with ball joint for the 2022-2025 Mercedes-Benz EQS 450+ and other vehicles links the front right wheel to the chassis. It comes as a control arm and ball joint assembly, so the ball joint is part of the arm.
A clunk over bumps, loose-feeling steering or uneven front tire wear can mean the arm or its ball joint is worn, though a worn sway bar link or wheel bearing can be behind the same signs, so find the cause first.
This control arm with ball joint also fits the 2022-2025 Mercedes-Benz EQS 580 and the 2023-2025 Mercedes-Benz EQE 350, along with many other Mercedes-Benz models; open the "Vehicles it fits" section to check your exact model and engine. This listing is one arm for the front right, and the 2022-2025 Mercedes-Benz EQS 450+ takes one on that side. The front left is a separate part ordered on its own, and both sides are normally replaced together.
Fit and size
Build and materials
Interchange: 2973304400 · A2973304400
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Delphi TC9413 control arm right for a 2022-2025 Mercedes-Benz EQS 580?
Yes. Delphi TC9413 is a front right upper control arm with ball joint listed for the 2022-2025 Mercedes-Benz EQS 580.
How are the ball studs on this Delphi control arm made?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation.
What testing does this front right upper control arm go through?
Each Delphi control arm gets 100% crack detection and ultrasonic flaw detection. The parts are also tested below -40 degrees C and over 120 degrees C and exposed to 720 hours of salt spray.
How can I tell if the ball joint on my front right upper control arm is worn?
A clunk over bumps, loose-feeling steering or uneven front tire wear can be signs of a worn joint. A shop can check the joint for play.
Can I use Delphi TC9413 in place of number A2973304400?
Yes. A2973304400 and 2973304400 are cross-referenced to Delphi TC9413, a front right upper control arm with ball joint.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.