Front Upper Control Arm Bushing for 2010-2017 Audi Q5 & More - Delphi TD1062W

$12.99
WARNING:California Proposition 65▾
Delphi Suspension Control Arm Bushing TD1062W
Delphi Suspension Control Arm Bushing TD1062W

Vehicles this part fits
    Part number: TD1062W
    UPC: 689604404379
    Condition: New
    Weight: 0.20 LBS
    Item Package Quantity: 1
    $12.99
    Adding to cart… The item has been added

    Have questions?

    Ask an Expert
    Delphi Suspension Control Arm Bushing P/N:TD1062W
    Delphi Suspension Control Arm Bushing P/N:TD1062W
    $12.99
    $12.99

    Delphi TD1062W front upper control arm bushing for the 2010-2017 Audi Q5 and other vehicles joins the control arm to the frame. Also called a suspension control arm bushing, it gives the arm a cushioned pivot point.

    • Withstands temperatures below -40 degrees C and over 120 degrees C in testing
    • Exposed to 720 hours of salt spray in testing
    • Manufactured for consistent life and reduced noise
    • Manufactured to reduce vibration

    Quick facts

    • Part: Delphi TD1062W control arm bushing
    • Also called: suspension control arm bushing
    • Fits: 2010-2017 Audi Q5 and other vehicles
    • Position: Front upper to frame

    A worn bushing can show up as a clunk over bumps, loose steering feel or a bushing that looks cracked or split. These signs alone do not prove the bushing is at fault, since a worn ball joint can cause a similar clunk. Both sides are normally replaced together, and this listing is one bushing.

    Fits

    This bushing is listed for a wide range of Audi models, led by the 2010-2017 Audi Q5, the 2010-2017 Audi S5 and the 2011-2017 Audi A5 Quattro. The 2010-2017 Audi Q5 takes two. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    • Position: Front upper to frame
    • Quantity per vehicle: 2
    • Sold as: one bushing per listing
    • Installation type: press-in

    Interchange: 8R0 407 515
    KCM1000

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    8R0 407 515, KCM1000

    Frequently Asked Questions

    Will these Audi Q5 control arm bushings fit a 2010-2017 Audi Q5?

    Yes. Delphi TD1062W is listed for the 2010-2017 Audi Q5, which takes two. Open the "Vehicles it fits" section to check your engine.

    Do these Audi S5 control arm bushings fit the 2010-2017 Audi S5?

    Yes. Delphi TD1062W is listed for the 2010-2017 Audi S5 as a front upper control arm bushing that mounts to the frame.

    Does Delphi TD1062W replace Audi number 8R0 407 515?

    Yes. 8R0 407 515 and KCM1000 are both listed as interchange numbers for this Delphi bushing.

    What testing do these Delphi bushings go through?

    They are tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray.

    How can I tell a front upper control arm bushing is worn?

    A clunk over bumps, loose-feeling steering or a visibly cracked or split bushing can point to wear. A shop can measure play in the suspension to confirm it.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review

    Related Products

    !