Help cut suspension noise and vibration at the rear lower control arm with the Delphi Control Arm Bushing TD1478W. It fits many vehicles, among them the 1999-2005 Hyundai Sonata, 2001-2006 Kia Optima and 2002-2005 Hyundai XG350.
This suspension control arm bushing is cataloged for the rear lower and rear lower forward inner positions, depending on the application. Delphi's OE safety technology is fitted to millions of vehicles worldwide, and the company applies that OE expertise to its aftermarket steering range. Its dimensional and material analysis is aimed at close compatibility between the original part and the aftermarket replacement.
- Designed to OE standards: Delphi engineers its bushings to OE standards.
- Tested at the extremes: Delphi tests its parts at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray.
- Noise and vibration control: The bushings are manufactured for consistent life and to help reduce noise and vibration.
- Ready for the job: Delphi includes the accessories it specifies as necessary for the installation.
A control arm bushing may need replacing if you notice clunking or knocking over bumps, loose or wandering handling, uneven tire wear, or a bushing that looks cracked or torn. Other suspension parts can cause similar symptoms, so diagnose the cause before replacing. See the "Vehicles it fits" section for the full list of applications.
Interchange: 101-6217 · 55215-38000
1016217 · 5521538000 · BU05030 · BC60699 · BC60699PR · K200034 · GS90419 · MS90419 · JBU1589
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-6217, 55215-38000, BU05030, BC60699, BC60699PR, K200034, GS90419, MS90419, JBU1589
Frequently Asked Questions
Will this work as a control arm bushing for the 2001-2006 Kia Optima?
Yes. It is listed for the 2001-2006 Kia Optima, along with the 1999-2005 Hyundai Sonata and 2002-2005 Hyundai XG350. See the "Vehicles it fits" section for the other applications.
What does a control arm bushing do?
It cushions the joint where the control arm pivots. This helps locate the arm and reduces the noise and vibration passed into the vehicle.
Which position does Delphi TD1478W fit?
It is cataloged for the rear lower and rear lower forward inner control arm positions, depending on the application.
How does Delphi test this bushing?
Delphi tests its parts at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray. It also designs its bushings to OE standards.
What are the signs of a worn control arm bushing?
Common signs are clunking over bumps, loose or wandering handling, uneven tire wear and visible cracking or tearing. Other suspension parts can cause similar symptoms, so diagnose the cause first.
