Delphi TD4233W front right lower control arm bushing for the 2003-2011 Ford Crown Victoria and other vehicles cushions the control arm pivot. It is designed to OE standards.
- Rubber bushing manufactured for consistent service life and reduced noise
- Bushing manufactured to reduce vibration
- Bushing withstands temperatures below -40 °C and over 120 °C and is exposed to 720 hours of salt spray in testing
Quick facts
- Part: Delphi TD4233W control arm bushing
- Also called: suspension control arm bushing
- Fits: 2003-2011 Ford Crown Victoria and other vehicles
- Position: Front right lower, front right lower rearward
- Material: Natural rubber
Cracked or separated rubber, a clunk over bumps or a loose steering feel can mean this bushing is worn. A ball joint, a bent control arm or a tired shock can bring on those signs as well, so find the cause before you buy. This listing is one bushing; the front right position on the 2003-2011 Ford Crown Victoria takes one, the left side is ordered separately, and both sides are normally replaced together.
Fits
It is a direct-fit control arm bushing for a wide range of Ford, Lincoln and Mercury models, including the 2003-2011 Lincoln Town Car and the 2003-2010 Mercury Grand Marquis. Owners of other cars can look up their own year and model in the "Vehicles it fits" section.
Specifications
- Position: front right lower, front right lower rearward
- Quantity for this position: 1
- Material: natural rubber
Interchange: 602.61078 · 523-626 · 4W1Z 5A486-AB · 4W7Z 5A486-AB
9W1Z5A486B · 9W7Z5A486B · BC85344 · BC85344PR · K80834 · GS40402 · MS40402 · JBU1381
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
602.61078, 523-626, 4W1Z 5A486-AB, 4W7Z 5A486-AB, 9W1Z5A486B, 9W7Z5A486B, BC85344, BC85344PR, K80834, GS40402, MS40402, JBU1381
Frequently Asked Questions
Are these Crown Victoria control arm bushings right for a 2003-2011 Ford Crown Victoria?
Yes. Delphi TD4233W is a front right lower control arm bushing listed for the 2003-2011 Ford Crown Victoria. The left side is a separate part.
Is this suspension control arm bushing made of natural rubber?
Yes. Delphi TD4233W is a natural rubber bushing, manufactured to reduce noise and vibration and for consistent service life.
Which positions is the TD4233W bushing listed for?
This bushing is listed for the front right lower and front right lower rearward positions. The left side takes its own bushing, ordered separately.
How can I tell if this front right lower control arm bushing is worn?
A clunk over bumps or a loose steering feel can mean wear, as can cracked or separated rubber. A shop can inspect the bushing safely.
Does Delphi TD4233W cross to 4W1Z 5A486-AB?
Yes. 4W1Z 5A486-AB is one of the numbers on the Interchange line for Delphi TD4233W, along with 4W7Z 5A486-AB and 523-626.
