Delphi TD4256W rear lower control arm bushing for the 2002-2005 Jeep Liberty 4-cylinder 2.4L, the 2002-2006 Liberty V6 3.7L and the 2005-2006 Liberty 4-cylinder 2.8L is manufactured to reduce vibration and noise where the control arm pivots.
- Manufactured to reduce noise and for consistent life
- Manufactured to reduce vibration
- Tested at temperatures below -40 degrees C and over 120 degrees C
- Exposed to 720 hours of salt spray in testing
Quick facts
- Part: Delphi TD4256W control arm bushing
- Also called: suspension control arm bushing
- Fits: 2002-2005 Jeep Liberty 4-cylinder 2.4L, the 2002-2006 Liberty V6 3.7L and the 2005-2006 Liberty 4-cylinder 2.8L
- Position: Rear lower rearward
- Condition: New
A worn suspension control arm bushing can show up as a clunk over bumps, loose-feeling handling or uneven tire wear. Those signs can also come from other rear suspension parts, so find the cause before replacing it. With the engine off, cracks or tears are visible by eye, and a shop can check for play.
Fits
This is a control arm bushing for the 2002-2005 Jeep Liberty 4-cylinder 2.4L, the 2002-2006 Liberty V6 3.7L and the 2005-2006 Liberty 4-cylinder 2.8L, and it is designed to OE standards.
Specifications
- Position: rear lower rearward
- Quantity per vehicle: 2
- Condition: new
In the box
One control arm bushing with the necessary accessories. The car takes two at this position, and both sides are normally replaced together.
Interchange: 52089 065AA
K200257 · MS25455 · JBU1399
This part cross-references / interchanges with the following part numbers:
52089 065AA, K200257, MS25455, JBU1399
Frequently Asked Questions
Does the Delphi TD4256W fit the 2002-2006 Jeep Liberty V6 3.7L?
Yes. Delphi TD4256W is the rear lower rearward control arm bushing for the 2002-2006 Jeep Liberty V6 3.7L, and the car takes two of them at this position.
Does this bushing fit the 2005-2006 Jeep Liberty 4-cylinder 2.8L?
Yes. Delphi TD4256W fits the 2005-2006 Jeep Liberty 4-cylinder 2.8L and the 2002-2005 Liberty 4-cylinder 2.4L in the rear lower rearward position.
What temperature and salt spray testing does this Delphi bushing go through?
It is tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray.
Does this rear lower control arm bushing come with accessories for the install?
Yes. The necessary accessories come with the bushing. This listing is one bushing, and the car takes two at this position.
What can a worn rear lower control arm bushing feel like?
A clunk over bumps, loose-feeling handling or uneven tire wear can go with a worn bushing. Cracks or tears seen with the engine off are another sign.
