Help reduce noise and vibration at the front lower control arm with the Delphi Control Arm Bushing TD4364W, a replacement bushing that sits where the lower arm attaches to the frame. It fits many vehicles, among them the 1984-1994 Ford Tempo, 1984-1990 Ford Escort and 1984-1988 Ford EXP. See the "Vehicles it fits" section for the full list and engine details.
The catalog lists this bushing for the front lower position, at the front arm-to-frame mounting point. Delphi fits its OE safety technology to millions of vehicles worldwide and applies that OE expertise to its aftermarket portfolio. It uses extensive dimensional and material analysis to match the aftermarket part closely to the OE part.
- Designed to OE standards: Delphi engineers its bushings to original-equipment standards.
- Noise and vibration: Manufactured for consistent life and to reduce noise and vibration.
- Tested to the extreme: Delphi tests its parts to withstand temperatures below -40°C and above 120°C, and exposes them to 720 hours of salt spray.
- Accessories included: Delphi supplies the necessary accessories with the bushing.
A worn control arm bushing can show up as clunking over bumps, a loose or wandering steering feel, or uneven tire wear. If a worn bushing is the cause, TD4364W replaces it.
Interchange: E6FZ-3069A
E6FZ3069A · BB8417 · BB8417PR · K8417 · GK8417 · MK8417
This part cross-references / interchanges with the following part numbers:
E6FZ-3069A, BB8417, BB8417PR, K8417, GK8417, MK8417
Frequently Asked Questions
Is this the right control arm bushing for a 1984-1990 Ford Escort?
TD4364W is listed for the 1984-1990 Ford Escort in the front lower position, at the front arm-to-frame location. Check the "Vehicles it fits" section to confirm your exact vehicle.
What does a suspension control arm bushing do?
It sits where the control arm attaches to the frame and lets the arm pivot. Delphi manufactures this bushing to reduce noise and vibration.
Where does Delphi TD4364W install?
The catalog lists it for the front lower position, at the front of the lower control arm where the arm attaches to the frame.
What signs may mean a control arm bushing needs replacing?
Clunking over bumps, a loose or wandering steering feel, uneven tire wear, or a cracked or torn bushing may mean it needs replacing. Inspect the suspension to confirm the cause first.
How does Delphi test its bushings?
Delphi says its parts withstand temperatures below -40°C and above 120°C and are exposed to 720 hours of salt spray. Dimensional and material analysis checks them against the OE part.
