Delphi TC2715 front left lower control arm for the 2002-2005 Mercedes-Benz ML500 and other vehicles locates the left front wheel as the suspension moves. Use this suspension control arm to replace a worn or damaged one.
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durable, smooth joint operation
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC2715 control arm
- Also called: suspension control arm
- Fits: 2002-2005 Mercedes-Benz ML500 and other vehicles
- Position: Front left lower
- Condition: New
A worn lower control arm can show up as a clunk over bumps, uneven front tire wear or a loose feel in the steering. Worn sway bar links, struts or tie rod ends can produce some of the same signs, so find out what is behind them before you buy. Both front lower arms are normally replaced together; this listing is one arm for the front left, the front right is a separate part, and the 2002-2005 Mercedes-Benz ML500 takes one on this side.
Fits
Fitment includes the 2002-2005 Mercedes-Benz ML500, the 2003-2005 Mercedes-Benz ML350 and the 2000-2003 Mercedes-Benz ML320, and this arm is a direct-fit replacement for each of them. If your car is a different model, look up its year and model in the "Vehicles it fits" section.
Specifications
- Position: Front left lower
- Quantity per vehicle: 1 on this side
- Sold individually: one arm per listing
- Condition: New
Interchange: 163 330 08 07 · A 163 330 08 07
1028236 · CK641498 · K641498 · RK641498 · CMS10124 · MS10122
This part cross-references / interchanges with the following part numbers:
1028236, CK641498, K641498, RK641498, 163 330 08 07, A 163 330 08 07, CMS10124, MS10122
Frequently Asked Questions
Is this the right control arm for a 2003-2005 Mercedes-Benz ML350?
Yes. Delphi TC2715 fits the front left lower position on the 2003-2005 Mercedes-Benz ML350. The right side is a separate part.
How is each Delphi control arm checked for flaws?
Every arm gets 100% crack detection and ultrasonic flaw detection. The ball studs are machined to micron tolerances, and the welding is done by robot.
Does this control arm have rust protection?
Yes. Anti-corrosion protection is applied to each part, and the arms are exposed to 720 hours of salt spray in testing.
Does Delphi TC2715 replace number A 163 330 08 07?
Yes. Delphi TC2715 is cross-referenced to A 163 330 08 07 and several other numbers, all of which are printed on the Interchange line.
Does one TC2715 cover both front lower arms?
No. Delphi TC2715 is one front left lower control arm. The front right lower arm is a separate part that is ordered on its own.
