Delphi TC3591 front right lower control arm for the 2012-2022 Volkswagen Passat and other vehicles connects the wheel assembly to the chassis and lets the suspension move. This Delphi control arm, also called a suspension control arm, mounts in the lower front right position.
- Withstands temperatures below -40 °C and over 120 °C and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each arm
Quick facts
- Part: Delphi TC3591 control arm
- Also called: suspension control arm
- Fits: 2012-2022 Volkswagen Passat and other vehicles
- Position: Front right lower
- Condition: New
A worn arm can show up as a clunk over bumps, wandering steering or uneven front tire wear. Before you replace this arm, rule out a worn strut mount, sway bar link or tie rod, since those parts can make similar noises or pulling.
Fits
It fits the 2012-2022 Volkswagen Passat and is a control arm for the 2012-2019 Volkswagen Beetle, and both cars take one at the front right. Front control arms are normally replaced as a pair, and this listing is one arm for the front right; the front left is ordered separately.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Welding: robot welded
- Corrosion protection: anti-corrosion protection applied
- Ball studs: machined to micron tolerances
Interchange: 102-7909 · 522-838 · 561 407 152 A · 561 407 152 C
CB43314 · CB43314PR · CMS70181 · GS70181
This part cross-references / interchanges with the following part numbers:
102-7909, 522-838, CB43314, CB43314PR, CMS70181, GS70181, 561 407 152 A, 561 407 152 C
Frequently Asked Questions
Is this VW Passat control arm the right one for the 2012-2022 Volkswagen Passat?
Yes. Delphi TC3591 is a front right lower control arm that fits the 2012-2022 Volkswagen Passat, and the car takes one at that position.
Is this Passat lower arm for the left or right side of the 2012-2022 Volkswagen Passat?
Right side. This arm is made for the front right lower position, so the left side is ordered as a separate part.
Are the ball studs on the Delphi TC3591 control arm machined?
Yes. The ball studs are machined to micron tolerances for durability and smooth joint operation, and the arm body is robot welded.
What can I see on a worn front lower control arm?
With the engine off and the car parked, look for cracks or bent metal on the arm. A shop can test ball joint play safely on a lift.
Is 561 407 152 A the same as Delphi TC3591?
Yes. 561 407 152 A is one of the numbers that this Delphi TC3591 front right lower control arm replaces.
