Delphi TC4487 rear left lower control arm for the 2019-2025 Volvo XC40 and other vehicles links the wheel to the chassis. Dimensional and material analysis backs its compatibility with the OE part.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 degrees C and over 120 degrees C, and through 720 hours of salt spray
Quick facts
- Part: Delphi TC4487 control arm
- Also called: suspension control arm
- Fits: 2019-2025 Volvo XC40 and other vehicles
- Position: Rear Left Lower
- Condition: New
A worn suspension control arm can show up as a clunk over bumps, uneven tire wear or a car that wanders. Those signs can also come from shocks, tires or alignment, so find the cause before replacing the arm. With the engine off, a look for cracks or bends is a fair first step, and a shop can test the joint for play.
Fits
This arm fits the 2019-2025 Volvo XC40 and the 2021-2024 Volvo XC40 Recharge. This listing is one arm for the rear left; the rear right is a separate part, and both sides of that axle are normally done at the same time.
Specifications
Fit and size
- Position: Rear left lower
- Quantity per vehicle: 1 (rear left)
Build and materials
- Construction: robot welded
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied to each part
- Condition: New
- Country of origin: Turkey
In the box
One control arm. The rear left position takes one.
Interchange: 1028455 · X53LA0593 · 32221199
This part cross-references / interchanges with the following part numbers:
1028455, X53LA0593, 32221199
Frequently Asked Questions
Will the Delphi TC4487 fit the 2021-2024 Volvo XC40 Recharge?
Yes. Delphi TC4487 is a rear left lower control arm that fits the 2021-2024 Volvo XC40 Recharge as well as the 2019-2025 Volvo XC40.
How is the Delphi control arm tested?
This control arm is tested at temperatures below -40 degrees C and over 120 degrees C and through 720 hours of salt spray. Every arm also gets 100% crack detection and ultrasonic flaw detection.
How tight are the ball stud tolerances on the Delphi TC4487?
Delphi machines the ball studs on the TC4487 to micron tolerances, for durability and smooth joint operation.
Can a clunk over bumps point to a worn rear lower control arm?
Yes, a clunk over bumps, uneven tire wear or a wandering feel can be signs of a worn arm or its ball joint. A shop can test the joint for play.
Is 32221199 an interchange number for this control arm?
Yes. 32221199 is listed with 1028455 and X53LA0593 as numbers the Delphi TC4487 replaces.
