Delphi TC4515 rear left upper control arm for the 2011-2018 Volvo S60 and other vehicles links the rear left wheel to the body. Also called a suspension control arm, it locates the wheel as it moves up and down.
- Control arm withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- Delphi control arm gets 100% crack detection and ultrasonic flaw detection on its material
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each arm
Quick facts
- Part: Delphi TC4515 control arm
- Also called: suspension control arm
- Fits: 2011-2018 Volvo S60 and other vehicles
- Position: Rear left upper
- Condition: New
A worn arm can show up as clunking from the rear suspension over bumps, uneven rear tire wear or vague handling. Before you replace this arm, rule out a worn rear shock, a tired bushing or an alignment problem, since any of them may be behind the noise instead. This listing is one arm for the rear left; the rear right is a separate part, and both sides are normally replaced together.
Fits
It is listed for a wide range of Volvo models, led by the 2011-2018 Volvo S60, the 2015-2018 Volvo V60 and the 2016-2018 Volvo V60 Cross Country, and each takes one on the rear left; the rear right is ordered separately. Other Volvo models are covered in the "Vehicles it fits" section, so look your car up there.
Specifications
Fit and size
- Position: Rear left upper
- Quantity for this position: 1
Build and materials
- Construction: robot welded
- Corrosion protection: anti-corrosion protection on each part
- Condition: New
Interchange: KSC6161 · 30736941 · 31202761 · 31406746
This part cross-references / interchanges with the following part numbers:
KSC6161, 30736941, 31202761, 31406746
Frequently Asked Questions
Is this a 2011-2018 Volvo S60 control arm for the rear left upper position?
Yes. Delphi TC4515 is a rear left upper control arm for the 2011-2018 Volvo S60, and it is also listed for the 2015-2018 Volvo V60. Other Volvo models are in the "Vehicles it fits" section.
How are the ball studs on this Delphi control arm made?
On Delphi TC4515 the ball studs are machined to micron tolerances for durability and smooth joint operation, and the arm itself is robot welded for consistent quality.
Is this rear left upper control arm protected against corrosion?
Yes. Anti-corrosion protection is applied to each arm, and the parts are exposed to 720 hours of salt spray and temperatures below -40 degrees C and over 120 degrees C.
How do I tell if a rear left upper control arm is worn?
Look for clunking over bumps, uneven rear tire wear or vague handling. Cracks or rust on the arm can also point to wear, and a shop can safely test the ball joint for play.
Does Delphi TC4515 replace the 30736941 control arm?
Yes. Delphi TC4515 is a replacement for number 30736941, and it also replaces KSC6161, 31202761 and 31406746.
