Delphi TC4525 front right lower control arm for the 2017-2026 Audi Q7 and other vehicles links the wheel to the chassis. This Delphi control arm, also called a suspension control arm, goes on the front right lower forward position.
- Withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray in testing
- 100% crack detection and ultrasonic flaw detection on each control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part for corrosion prevention
Quick facts
- Part: Delphi TC4525 control arm
- Also called: suspension control arm
- Fits: 2017-2026 Audi Q7 and other vehicles
- Position: Front Right Lower Forward
- Material: Steel
- Condition: New
Clunking over bumps, uneven tire wear or a pull to one side can mean a worn control arm, though a worn sway bar link or tie rod end can be behind the same signs, so find the cause before you replace the arm.
Fits
The 2017-2026 Audi Q7, the 2019-2026 Audi A8 Quattro and the 2019-2026 Audi Q8 take this arm, along with other vehicles. A 2017-2026 Audi Q7 takes one on this side. This listing is one arm; the left side is a separate part ordered on its own, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front Right Lower Forward
- Quantity per vehicle: 1
Build and materials
- Material: steel
- Finish: painted
- Condition: new
- Country of origin: Turkey
Interchange: 4M0 407 152 F · 4M0 407 152 J · 4M0 407 152 L · 4M0 407 152 M · 958 407 152 00 · PAB 407 152
4M0407152D · 4M0407152E · 4M0407152H · 1028274 · RK643621 · CMS701205
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4M0407152D, 4M0407152E, 4M0 407 152 F, 4M0407152H, 4M0 407 152 J, 4M0 407 152 L, 4M0 407 152 M, 1028274, RK643621, CMS701205, 958 407 152 00, PAB 407 152
Frequently Asked Questions
Is the Delphi TC4525 an Audi Q7 control arm for a 2017-2026 Audi Q7?
Yes. Delphi TC4525 fits the front right lower forward position on the 2017-2026 Audi Q7. If your car is a different model, look for it in the "Vehicles it fits" section.
What is the Delphi TC4525 control arm made of?
This control arm is steel with a painted finish. Anti-corrosion protection is applied to each part.
What testing do Delphi control arms go through?
Delphi control arms undergo 100% crack detection and ultrasonic flaw detection. The parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray.
What can a worn lower control arm look like?
Cracks, torn rubber or play in the joint can point to wear on this lower control arm. A driver may also notice clunking over bumps or uneven tire wear, and a shop can confirm the cause.
Does the Delphi TC4525 replace number 4M0 407 152 F?
Yes. 4M0 407 152 F is one of the numbers Delphi TC4525 replaces, along with 4M0 407 152 J and 958 407 152 00.
