Delphi TC6218 rear upper control arm for the 2004-2008 Chrysler Pacifica links the rear suspension to the body of the vehicle. This Delphi control arm sits at the rear upper forward position and guides the wheel's movement as the suspension works.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Control arm tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC6218 control arm
- Also called: suspension control arm
- Fits: 2004-2008 Chrysler Pacifica
- Position: Rear Upper Forward
- Material: Steel
- Condition: New
A worn control arm can show up as a clunk from the rear over bumps, uneven rear tire wear or loose handling. Before you replace it, rule out worn shocks, springs and other rear suspension links, which can make similar noises. This listing is one control arm, and both sides are normally replaced together.
Fits
This is a direct-fit control arm for the 2004-2008 Chrysler Pacifica.
Specifications
Fit and size
- Position: Rear Upper Forward
- Quantity per vehicle: 2
Build and materials
- Material: Steel
- Finish: anti-corrosion protection
- Condition: New
In the box
One control arm. The 2004-2008 Chrysler Pacifica takes two.
Interchange: 4743 246AA · 522-370
LL81856 · LL81856PR · RK641999 · CMS251072 · GS251072
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4743 246AA, 522-370, LL81856, LL81856PR, RK641999, CMS251072, GS251072
Frequently Asked Questions
Does the Delphi TC6218 fit the 2004-2008 Chrysler Pacifica?
Yes. Delphi TC6218 is a rear upper forward control arm for the 2004-2008 Chrysler Pacifica, which takes two.
Is the Delphi TC6218 sold as a single control arm?
Yes. This listing is one control arm, and the vehicle takes two, so the second one is ordered on its own.
Is the Delphi TC6218 suspension control arm made of steel?
Yes. The Delphi TC6218 is a steel control arm with anti-corrosion protection applied to each part.
What can a worn rear upper control arm sound like?
A clunk from the rear over bumps, uneven rear tire wear or loose handling can be signs of a worn control arm or of other worn rear suspension parts. A shop can inspect it.
Is the Delphi TC6218 interchangeable with part number 522-370?
Yes. 522-370 is listed as an interchange number for the Delphi TC6218 rear upper control arm.
