Delphi TC7993 rear upper control arm for the 2006-2012 Ford Fusion and other vehicles connects the rear wheel assembly to the body. Also called a suspension control arm, it comes from dimensional and material analysis aimed at compatibility between the OE and aftermarket part.
- Tested below -40 degrees C, above 120 degrees C and through 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC7993 control arm
- Also called: suspension control arm
- Fits: 2006-2012 Ford Fusion and other vehicles
- Position: Rear upper
- Condition: New
A clunk from the rear suspension, uneven tire wear or a loose feel at the back can mean a worn arm. A tired rear shock, spring or bushing, or an alignment fault, can be behind those signs too, so trace the cause before you buy. Replace the rear upper arms together as a pair. This listing is one rear upper control arm for the 2011 Ford Fusion, which takes two.
Fits
Vehicles it fits include the 2006-2012 Ford Fusion, the 2003-2013 Mazda 6 and the 2007-2012 Lincoln MKZ. If your car is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear upper
- Quantity per vehicle: 2
Build and materials
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Corrosion protection: applied to each part
- Condition: New
Interchange: AE5Z 5500-A
RK100171 · CMS401196
This part cross-references / interchanges with the following part numbers:
AE5Z 5500-A, RK100171, CMS401196
Frequently Asked Questions
Is this Ford Fusion control arm the right one for the 2006-2012 Ford Fusion?
Yes. Delphi TC7993 is a rear upper control arm for the 2006-2012 Ford Fusion, which takes two. This listing is a single arm.
Does Delphi TC7993 work as a Mazda 6 control arm for the 2003-2013 Mazda 6?
Yes. It is listed as a rear upper control arm for the 2003-2013 Mazda 6, which takes two.
What testing does this Delphi control arm go through?
Every arm gets 100% crack detection and ultrasonic flaw detection. Delphi tests the parts below -40 degrees C, above 120 degrees C and through 720 hours of salt spray.
How can I tell if a rear upper control arm is worn?
A clunk from the rear suspension or uneven tire wear can mean wear. With the car parked, look for cracks, bends or heavy rust on the arm; a shop can check the joint.
Does Delphi TC7993 interchange with AE5Z 5500-A?
Yes. AE5Z 5500-A is one of the numbers Delphi TC7993 replaces. The full cross-reference is on the Interchange line.
