Delphi TC8974 front left lower control arm for the 2001-2004 Toyota Tacoma connects the front left wheel to the frame. Its ball stud joint lets the wheel move with the suspension and steering.
- Control arms withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC8974 control arm
- Also called: suspension control arm
- Fits: 2001-2004 Toyota Tacoma
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven tire wear or loose steering can mean a worn arm or ball joint, but other suspension parts produce those signs too. Start with a look at the arm for cracks, bends or a torn joint boot, with the engine off, during a tire or brake service.
Fits
It is a direct-fit replacement for the 2001-2004 Toyota Tacoma. This Delphi control arm is one piece for the front left; the front right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1 (this side)
- Pieces: 1, sold individually
Build and materials
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: New
In the box
One control arm. The front left of the 2001-2004 Toyota Tacoma takes one; the front right is ordered separately.
Interchange: 48069-35110
RK640892 · CMS861057
This part cross-references / interchanges with the following part numbers:
RK640892, CMS861057, 48069-35110
Frequently Asked Questions
Is the Delphi TC8974 one of the A-arms for the 2001-2004 Toyota Tacoma?
Yes. Delphi TC8974 is the front left lower control arm for the 2001-2004 Toyota Tacoma. The front right side is a separate part.
Does this front left lower control arm come with the right side too?
No. This listing holds one front left lower control arm. The front right is sold separately, and each side takes one.
How are the ball studs on this control arm made?
Delphi TC8974 has ball studs machined to micron tolerances for durability and smooth joint operation, and anti-corrosion protection is applied to the arm.
What testing does the Delphi suspension control arm go through?
Each arm gets 100% crack detection and ultrasonic flaw detection. These control arms withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray.
Is 48069-35110 the same part as this control arm?
Yes. 48069-35110 is listed as an interchange number for this front left lower control arm.
