Delphi TD4047W front inner sway bar bushing kit for the 1997-1999 Mitsubishi Montero Sport 4-cylinder 2.4L, the 1997-2003 Montero Sport V6 3.0L and the 1999-2004 Montero Sport V6 3.5L holds the sway bar in its mounts and cushions its movement. The bushings are designed to OE standards.
- Bushings made for consistent service life
- Bushings made to reduce noise
- Helps restore the smooth ride of the vehicle
- Tested for temperatures below -40 degrees C and over 120 degrees C
- Exposed to 720 hours of salt spray in testing
Quick facts
- Part: Delphi TD4047W sway bar bushing kit
- Also called: stabilizer bar bushing kit
- Fits: the 1997-1999 Mitsubishi Montero Sport 4-cylinder 2.4L, the 1997-2003 Montero Sport V6 3.0L and the 1999-2004 Montero Sport V6 3.5L
- Position: Front inner
- Condition: New
When a stabilizer bar bushing kit wears, you can notice a clunk over bumps, vibration or extra body lean in turns. These signs can point to worn bushings, though a worn sway bar end link or a control arm bushing can be behind them too, so find the source before you replace anything.
Fits
This front inner kit fits the 1997-1999 Mitsubishi Montero Sport 4-cylinder 2.4L, the 1997-2003 Montero Sport V6 3.0L and the 1999-2004 Montero Sport V6 3.5L.
Specifications
- Position: Front inner
- Quantity per vehicle: 1
- Condition: New
In the box
This listing is one front inner sway bar bushing kit, and the vehicle takes one.
Interchange: 101-6373
BSK67079 · BSK67079PR · K90638 · MK90638 · MR267649 · JBU1054
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-6373, BSK67079, BSK67079PR, K90638, MK90638, MR267649, JBU1054
Frequently Asked Questions
Does the Delphi TD4047W fit the 1999-2004 Mitsubishi Montero Sport V6 3.5L?
Yes. Delphi TD4047W is listed for the 1999-2004 Mitsubishi Montero Sport V6 3.5L, and it is a front inner sway bar bushing kit.
Is the Delphi TD4047W a front or rear sway bar bushing kit?
This Delphi TD4047W kit is for the front inner position of the sway bar. The vehicle takes one kit.
What testing do Delphi sway bar bushings go through?
Delphi tests its parts to withstand temperatures below -40 degrees C and over 120 degrees C. They are also exposed to 720 hours of salt spray.
Can worn front sway bar bushings cause a clunk over bumps?
Yes, they can. A worn bushing lets the bar shift in its mount, which can knock over bumps; a shop can pinpoint the source of the noise.
Is Delphi TD4047W a replacement for number K90638?
Delphi TD4047W is listed as a replacement for K90638, along with MK90638 and 101-6373 and the other numbers on the Interchange line.
