Delphi TD4457W rear sway bar bushing kit for the 2002-2009 Subaru Legacy H4 2.5L, the 2009 Legacy H6 3.0L and other vehicles holds the rear sway bar in its mounts and cushions the bar as it twists. The bushings are designed to OE standards.
- Bushings made for consistent service life
- Bushings made to reduce noise
- Bushings that help restore the smooth ride of the vehicle
- Bushing kit withstands temperatures below -40 degrees C and over 120 degrees C
- Bushing kit exposed to 720 hours of salt spray in testing
Quick facts
- Part: Delphi TD4457W sway bar bushing kit
- Also called: stabilizer bar bushing kit
- Fits: 2002-2009 Subaru Legacy H4 2.5L, the 2009 Legacy H6 3.0L and other vehicles
- Position: Rear
- Condition: New
If a stabilizer bar bushing kit is behind a clunk over bumps or a looser feel in turns, this kit replaces it. End links and other suspension parts can make similar noises, so find the source first; a shop can inspect the bushings on a lift.
Fits
It is listed for a wide range of Subaru models, including the 2002-2004 Subaru Outback H4 2.5L or H6 3.0L and the 2003-2005 Subaru Impreza H4 2.0L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Position: Rear
- Quantity per vehicle: 1
- Condition: New
In the box
This listing is one rear sway bar bushing kit, and the vehicles it is listed for take one.
Interchange: 928-509
BSK72539 · BSK72539PR · K200813 · 20464AE020 · 20464AE07A · JBU1682
This part cross-references / interchanges with the following part numbers:
928-509, BSK72539, BSK72539PR, K200813, 20464AE020, 20464AE07A, JBU1682
Frequently Asked Questions
Is the Delphi TD4457W rear bushing kit right for the 2002-2004 Subaru Outback H4 2.5L or H6 3.0L?
Yes. Delphi TD4457W is listed for the 2002-2004 Subaru Outback with the H4 2.5L or the H6 3.0L engine. For another model, open the "Vehicles it fits" section.
Are these Delphi sway bar bushings made to reduce noise?
Yes. The bushings are made to reduce noise and for consistent life. A clunk that comes from another part, such as an end link, may not stop with new bushings.
How are the Delphi TD4457W bushings tested?
Delphi TD4457W bushings withstand temperatures below -40 degrees C and over 120 degrees C. They are also exposed to 720 hours of salt spray.
What can worn rear sway bar bushings sound or look like?
A rattle or clunk over bumps, or a looser feel in turns, can mean the bushings are worn. A shop can inspect them on a lift.
Is the Delphi TD4457W the same as BSK72539?
Yes. BSK72539 is one of the numbers Delphi TD4457W replaces, along with 928-509 and K200813. The full list is on the Interchange line.
