Keep body roll in check and quiet the clunk over bumps with the Delphi Suspension Stabilizer Bar Link Kit (TC1528). This front right sway bar link connects the stabilizer bar to the suspension, transferring load between the two sides to help limit lean through corners. It's a direct-fit replacement for the 2004-2014 Acura TSX, 2005-2007 Honda Accord, 2010-2011 Honda Accord Crosstour, and 2012-2015 Honda Crosstour.
Delphi OE engineering: built on Delphi's OE steering and suspension expertise, with extensive dimensional and material analysis for close OE-to-aftermarket compatibility. Validated in the extreme — down below -40°C, above 120°C, and through 720 hours of salt spray.
- Fatigue tested to help guard against failure.
- Ultrasonic molding to help prevent future weld breakage.
- Machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection applied to each part for corrosion prevention and enhanced aesthetics.
Worn links often announce themselves with a clunk or rattle over bumps and looseness through turns; if a failed link is the cause, this stabilizer bar link kit replaces it.
Interchange: 101-5300 · 606.40035 · 51320-SEA-E01
1015300 · 60640035 · 51320SEAE01 · SK90457 · SL59042 · SL59042XL · SL59172 · K90457 · GK90457 · MK90457 · MK90661 · MS60838 · MS60857 · JTS7590
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5300, 606.40035, 51320-SEA-E01, SK90457, SL59042, SL59042XL, SL59172, K90457, GK90457, MK90457, MK90661, MS60838, MS60857, JTS7590
Frequently Asked Questions
What is a stabilizer bar link and what does this part do?
It links the stabilizer (sway) bar to the suspension, transferring load side to side to help control body roll and lean through corners. This kit is the front right link.
Which vehicles does the Delphi TC1528 fit?
It fits the 2004-2014 Acura TSX, 2005-2007 Honda Accord, 2010-2011 Honda Accord Crosstour, and 2012-2015 Honda Crosstour. See the "Vehicles it fits" section to confirm your exact vehicle.
What are the signs my sway bar link may need replacing?
Common signs include a clunk or rattle over bumps and a loose, less-controlled feel through turns. Diagnose the cause first, as other suspension parts can produce similar symptoms.
How is the Delphi TC1528 built for durability?
It's fatigue tested, ultrasonically molded to help prevent future weld breakage, and machined to micron tolerances for smooth joint operation, with anti-corrosion protection on each part.
Should I replace both sway bar links at the same time?
This listing is the front right link. Links wear at a similar rate, so replacing the matching side together is a good practice for balanced handling; confirm what your vehicle needs.
