Keep your front suspension tight and quiet with the Delphi Suspension Stabilizer Bar Link Kit TC1816. It installs as a direct-fit front replacement for the 2005-2009 Hyundai Tucson and 2005-2010 Kia Sportage — see the "Vehicles it fits" section for the full engine list. The sway bar link connects the front stabilizer bar to the suspension so both sides work together; when the joints wear, you may notice clunking or rattling over bumps, looser handling, or excess body roll in turns.
Delphi applies its OE steering and suspension expertise to this aftermarket part:
- Tested to extremes: validated below -40°C and above 120°C and exposed to 720 hours of salt spray, with dimensional and material analysis for OE-to-aftermarket compatibility.
- Fatigue tested: Delphi sway bar links are fatigue tested to help avoid failure.
- Ultrasonic molding: manufactured with ultrasonic molding to help prevent future weld breakage.
- Micron tolerances: machined to micron tolerances for durability and smooth joint operation, with anti-corrosion protection applied to each part for corrosion prevention and enhanced appearance.
Interchange: 101-4993 · 606.51017 · HU-L633 · 54830-1F000 · 54830-2E000 · 54830-2E100 · 545-1525
1014993 · 60651017 · HUL633 · 548301F000 · 548302E000 · 548302E100 · 5451525 · 548302 · LS14008 · 548302E200 · SL60020 · K80510 · SL615 · GS30856 · GS90841 · MK80510 · MS90841 · JTS849
This part cross-references / interchanges with the following part numbers:
101-4993, 606.51017, HU-L633, 54830-1F000, 548302, 54830-2E000, 54830-2E100, LS14008, 548302E200, SL60020, K80510, SL615, GS30856, GS90841, MK80510, MS90841, 545-1525, JTS849
Frequently Asked Questions
What vehicles does the Delphi TC1816 stabilizer bar link kit fit?
It is a direct-fit front replacement for the 2005-2009 Hyundai Tucson and 2005-2010 Kia Sportage. Check the "Vehicles it fits" section to confirm the exact engine and application for your vehicle.
What does a sway bar link do?
It links the front stabilizer (sway) bar to the suspension so the left and right sides act together, helping control body roll and keep handling stable through turns.
What are the signs my sway bar links may need replacing?
Common signs include clunking or rattling over bumps, looser or vague steering feel, and increased body roll in corners. Diagnose the cause before replacing, as other parts can produce similar symptoms.
Is this part corrosion resistant?
Yes. Delphi applies anti-corrosion protection to each part for corrosion prevention and enhanced appearance, and the links are exposed to 720 hours of salt spray during testing.
How is the Delphi part built for durability?
The links are fatigue tested to help avoid failure, manufactured with ultrasonic molding to help prevent future weld breakage, and machined to micron tolerances for smooth joint operation.
