Keep the rear stabilizer bar tied tightly to the suspension with the Delphi Suspension Stabilizer Bar Link Kit (TC1876). This rear stabilizer bar link kit links the sway bar to the suspension so the bar can resist body roll, and it drops in as a direct-fit replacement for the 2005-2009 Hyundai Tucson and 2005-2010 Kia Sportage. When a link's ball joints wear out, you may notice clunking or rattling over bumps and looser handling through corners — if worn links are the cause, this replaces them.
- Built to OE standards: Delphi applies its OE steering expertise to the aftermarket, testing parts below -40°C and above 120°C plus 720 hours of salt spray, with dimensional and material analysis for OE-to-aftermarket compatibility.
- Fatigue tested: Delphi sway bar links are fatigue tested to help avoid failure.
- Ultrasonic molding: manufactured with ultrasonic molding to help prevent future weld breakage.
- Micron tolerances & anti-corrosion: machined to micron tolerances for durability and smooth joint operation, with anti-corrosion protection applied for corrosion prevention and enhanced appearance.
Interchange: 101-5078 · 606.51018 · HU-L635 · 55530-1F000 · 55530-2E000 · 55530-2E100 · 545-1526
1015078 · 60651018 · HUL635 · 555301F000 · 555302E000 · 555302E100 · 5451526 · 555302E200 · LS04025 · SL60025 · SL63530 · K80511 · SL616 · GK80511 · GS90842 · MK80511 · MS90842 · JTS110
This part cross-references / interchanges with the following part numbers:
101-5078, 606.51018, HU-L635, 55530-1F000, 55530-2E000, 55530-2E100, 555302E200, LS04025, SL60025, SL63530, K80511, SL616, GK80511, GS90842, MK80511, MS90842, 545-1526, JTS110
Frequently Asked Questions
What vehicles does the Delphi TC1876 fit?
It's a direct-fit replacement for the 2005-2009 Hyundai Tucson and 2005-2010 Kia Sportage. See the "Vehicles it fits" section to confirm the exact engine and trim for your vehicle.
Is this a front or rear part?
This is a rear stabilizer bar link kit — it connects the rear sway bar to the suspension on the listed applications.
What does a stabilizer bar link kit do?
It links the stabilizer (sway) bar to the suspension so the bar can resist body roll and help keep the vehicle stable through turns.
What are the signs a sway bar link may need replacing?
Worn link ball joints can cause clunking or rattling over bumps and looser handling in corners. If worn links are the cause, this kit replaces them.
How is the Delphi TC1876 protected against corrosion?
Anti-corrosion protection is applied to the part for corrosion prevention and enhanced appearance, and Delphi exposes its parts to 720 hours of salt spray during testing.
