Tie the rear stabilizer bar to the suspension and control body roll through corners with the Delphi Rear Suspension Stabilizer Bar Link Kit TC2387. It installs as a direct-fit replacement for the 1995-2000 Mitsubishi Montero and the 1997-2004 Mitsubishi Montero Sport — see the "Vehicles it fits" section for engine specifics.
Delphi applies its OE steering and suspension expertise to this aftermarket link kit, validating it against extremes: parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with dimensional and material analysis targeting OE compatibility.
- Fatigue tested: Delphi sway bar links are fatigue tested to help avoid failure.
- Ultrasonic molding: manufactured with ultrasonic molding to help prevent future weld breakage.
- Micron tolerances: machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection: applied to each part for corrosion prevention and enhanced aesthetics.
Worn links can produce clunking or rattling over bumps and knocking when turning; if a failed link is the cause, this kit replaces it. Replacing both rear links together is recommended for balanced operation.
Interchange: 101-5267 · 101-6348 · 101-6495 · MS-L629
1015267 · 1016348 · 1016495 · MSL629 · LS17098 · SL68085 · SL68085PR · SL68520 · SL68525 · SL68525PR · K700602 · K750076 · K90631 · FA7468 · MK750076 · MK9232 · MS80850 · MS80864 · MB598098 · JTS750
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5267, 101-6348, 101-6495, MS-L629, LS17098, SL68085, SL68085PR, SL68520, SL68525, SL68525PR, K700602, K750076, K90631, FA7468, MK750076, MK9232, MS80850, MS80864, MB598098, JTS750
Frequently Asked Questions
What vehicles does the TC2387 fit?
It is a direct-fit replacement for the 1995-2000 Mitsubishi Montero and the 1997-2004 Mitsubishi Montero Sport. Check the "Vehicles it fits" section for engine-level details.
What does a sway bar link do?
It connects the stabilizer (sway) bar to the suspension, transmitting force between the two to help control body roll when cornering.
What position is this stabilizer bar link kit for?
This kit is cataloged for the rear position on the listed applications.
What are signs my sway bar links may need replacing?
Clunking or rattling over bumps and knocking when turning can be signs of worn links. Diagnose the cause first, since other suspension parts can produce similar noises.
Should I replace both rear links at once?
Replacing both rear links together is recommended for balanced operation. Confirm the quantity your vehicle requires before ordering.
