Keep your front anti-roll bar working through every corner with the Delphi Suspension Stabilizer Bar Link Kit TC2889. This front sway bar link kit drops in as a direct-fit replacement for the 2003-2006 Mitsubishi Outlander (see the Buyer's Guide tab for engine-level applications). It connects the front stabilizer bar to the suspension so the bar can resist body roll and keep the vehicle level during cornering.
- OE-grade validation: Delphi applies its OE steering expertise to the aftermarket, testing to the extreme — parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with dimensional and material analysis for close OE-to-aftermarket compatibility.
- Fatigue tested: Delphi sway bar links are fatigue tested to help avoid failure.
- Ultrasonic molding: built with ultrasonic molding to help prevent future weld breakage.
- Micron tolerances: machined to micron tolerances for durable, smooth joint operation, with anti-corrosion protection applied for corrosion prevention and enhanced appearance.
Worn front links often show up as clunking or rattling from the front suspension over bumps and vague handling; if a failed link is the cause, this replaces it. Sold as a kit.
Interchange: 101-6377 · 606.46015 · 4056 A040
1016377 · 60646015 · 4056A040 · LS02014 · SL68095 · SL68095XL · K750181 · MS80851 · MR319147 · JTS7637
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicle does the Delphi TC2889 kit fit?
It is a direct-fit front replacement for the 2003-2006 Mitsubishi Outlander. Check the Buyer's Guide tab to confirm the exact application for your vehicle.
What does a stabilizer bar link kit do?
It links the front stabilizer (sway) bar to the suspension, letting the bar resist body roll so the vehicle stays more level through corners.
What are the signs my sway bar links may need replacing?
Common signs include clunking or rattling from the front suspension over bumps and vague or loose handling. Diagnose the cause before replacing.
How is the Delphi TC2889 built for durability?
It is fatigue tested, built with ultrasonic molding to help prevent weld breakage, machined to micron tolerances, and treated with anti-corrosion protection.
Should I replace both front links at once?
Replacing both front links together is a good practice for balanced handling, since both sides typically wear at a similar rate.
Write a Review