Tie the stabilizer bar to the suspension and keep body roll in check with the Delphi Suspension Stabilizer Bar Link Kit TC2913. Cataloged for both the front and rear positions, it drops in as a direct-fit replacement for the 1988-1997 Jaguar Vanden Plas, 1988-1992 and 1994-1996 Jaguar XJ12, 1988-1997 Jaguar XJ6, 1995-1997 Jaguar XJR, 1993 Jaguar XJRS and 1988-1996 Jaguar XJS. Delphi carries its OE steering and suspension expertise into the aftermarket, so this stabilizer bar link kit is built to withstand real-world extremes.
- OE-grade testing: Delphi tests to the extreme, with parts rated below -40°C and over 120°C and exposed to 720 hours of salt spray, plus dimensional and material analysis for close OE-to-aftermarket compatibility.
- Fatigue tested: the sway bar links are fatigue tested to help avoid failure in service.
- Ultrasonic molding: built with ultrasonic molding to help prevent future weld breakage.
- Micron tolerances & anti-corrosion: machined to micron tolerances for durability and smooth joint operation, with anti-corrosion protection applied to each part.
Worn or broken links often show up as a clunk or rattle over bumps and looser handling through turns; if a failed link is the cause, this kit replaces it.
Interchange: 101-6398
1016398 · LS03020 · 19237784 · CAC9827 · SL24035 · SL24035PR · K700001 · MS108154 · JTR113 · JTS1820
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does the Delphi TC2913 sway bar link kit fit?
It fits the 1988-1997 Jaguar Vanden Plas, 1988-1992 and 1994-1996 XJ12, 1988-1997 XJ6, 1995-1997 XJR, 1993 XJRS and 1988-1996 XJS. See the Buyer's Guide tab to confirm your vehicle.
Is this kit for the front or rear?
This stabilizer bar link kit is cataloged for both the front and rear positions. Check the Buyer's Guide tab to confirm the correct position for your vehicle.
What does a stabilizer bar link do?
It connects the stabilizer (sway) bar to the suspension, helping control body roll and keep both sides working together for more composed handling through turns.
What are the signs a sway bar link may need replacing?
Common signs include a clunk or rattle over bumps and looser, less controlled handling in corners. Diagnose the cause first, since other suspension parts can produce similar symptoms.
How is the Delphi TC2913 protected against corrosion?
Delphi applies anti-corrosion protection to each part, and the components are exposed to 720 hours of salt spray during testing for OE-level durability.
Write a Review