Tie the rear stabilizer bar back to the suspension and quiet the clunks with the Delphi Suspension Stabilizer Bar Link Kit TC3411, cataloged for the rear left position. It's a direct-fit replacement for the 2014-2020 Mazda 6, 2013-2022 Mazda CX-5, 2016-2022 Mazda CX-9, 2014-2018 Mazda 3, and 2014-2018 Mazda 3 Sport — see the Buyer's Guide tab for engine-level fitment. A sway bar link connects the stabilizer bar to the suspension so the bar can resist body lean; when the link's joint wears out it can produce rattles or knocks over uneven roads. If a worn rear left link is the cause, this stabilizer bar link kit replaces it.
- OE-derived engineering: Delphi applies its OE steering expertise to the aftermarket, with dimensional and material analysis for close OE-to-aftermarket compatibility.
- Validation testing: tested below -40°C and over 120°C and exposed to 720 hours of salt spray; links are fatigue tested to help avoid failure.
- Ultrasonic molding: used in manufacturing to help prevent future weld breakage.
- Precision + protection: machined to micron tolerances for smooth joint operation, with anti-corrosion protection applied to each part.
Interchange: 101-7869 · 606.45029 · KD31-28-190
1017869 · 60645029 · KD3128190 · LS17090 · SL65553 · K750671 · MS76871 · TXMS76871 · JTS1577
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What position does this Delphi TC3411 link kit fit?
It's cataloged for the rear left stabilizer bar link position on the listed Mazda applications. Confirm the fitment for your vehicle in the Buyer's Guide tab.
What does a sway bar link do?
It connects the stabilizer (sway) bar to the suspension so the bar can resist body roll. A worn link joint can cause rattles or knocking over bumps.
Which vehicles does this kit fit?
The 2014-2020 Mazda 6, 2013-2022 Mazda CX-5, 2016-2022 Mazda CX-9, 2014-2018 Mazda 3, and 2014-2018 Mazda 3 Sport. See the Buyer's Guide tab for details.
How has this Delphi part been tested?
Delphi tests below -40°C and over 120°C, exposes parts to 720 hours of salt spray, and fatigue tests its sway bar links to help avoid failure.
Does this part have corrosion protection?
Yes. Anti-corrosion protection is applied to each part, and it's machined to micron tolerances for smooth joint operation.
Write a Review