Keep your 2001-2006 Hyundai Santa Fe stabilizer bar tied to the suspension and help control cornering body roll with the Delphi Suspension Stabilizer Bar Link, MPN TC1532. This sway bar link connects the stabilizer bar to a suspension component so the bar can resist lean through turns; it installs in the rear right position as a direct-fit replacement for the 2001-2006 Hyundai Santa Fe.
Delphi applies the OE expertise behind safety technology fitted to millions of vehicles worldwide to this link, testing to the extreme for OE performance:
- Ultrasonic molding: helps prevent future weld breakage.
- Fatigue tested: validated to avoid premature failure.
- Micron-tolerance machining: supports durability and smooth joint operation.
- Anti-corrosion protection: applied to each part for corrosion prevention and improved appearance.
Delphi parts are validated below -40°C and above 120°C and through 720 hours of salt spray, with dimensional and material analysis for close OE-to-aftermarket compatibility. Worn links often show up as a rattle or knock over bumps and excess body roll in corners; if a failed link is the cause, this replaces it.
Interchange: 101-5380 · 602.44134 · HU-L627 · 536-343 · 55540-26600 · 55540-26700 · 545-1522
1015380 · 60244134 · HUL627 · 536343 · 5554026600 · 5554026700 · 5451522 · 5554026700DS · LS04024 · SL60502 · SL60502PR · K80507 · SL620 · MK80507 · JTS7598
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5380, 602.44134, HU-L627, 536-343, 55540-26600, 55540-26700, 5554026700DS, LS04024, SL60502, SL60502PR, K80507, SL620, MK80507, 545-1522, JTS7598
Frequently Asked Questions
What vehicle does the Delphi TC1532 stabilizer bar link fit?
It is a direct-fit replacement for the 2001-2006 Hyundai Santa Fe. See the "Vehicles it fits" section to confirm the exact match for your vehicle.
What position does this sway bar link install in?
This link is cataloged for the rear right position.
What does a sway bar link do?
It connects the sway bar to a suspension component, letting the bar resist body lean during cornering.
What are signs this link may need replacing?
Common signs include a rattle, clunk, or knocking over bumps and increased body roll in turns. Diagnose the cause first, since other worn parts can produce similar symptoms.
How is the Delphi TC1532 protected against rust?
Delphi applies anti-corrosion protection to each part for corrosion prevention and improved appearance, and Delphi parts are exposed to 720 hours of salt spray testing.
