Delphi Suspension Stabilizer Bar Link P/N:TC8414
Keep body roll in check and silence rear-end rattles with the Delphi Suspension Stabilizer Bar Link TC1885, a rear right stabilizer bar link that ties the rear sway bar to the suspension so cornering loads are transferred to control body lean. It installs as a direct-fit replacement for the listed applications, including the 2014-2022 Jaguar F-TYPE, 2010-2019 Jaguar XJ, 2009-2015 Jaguar XF and 2007-2015 Jaguar XK — see the Buyer's Guide tab for the full list.
Delphi builds on the OE safety technology fitted to millions of vehicles worldwide, testing to the extreme for OE performance: parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, while extensive dimensional and material analysis targets close compatibility between the OE and aftermarket part.
Signs this link may need replacing include clunking or rattling over bumps and increased body roll in turns — diagnose the cause before replacing. This is the rear right corner; for even, balanced handling, consider replacing the opposite side at the same time.
Interchange: 101-5657 · FO-L653 · XW4Z 5C486-AA
1015657 · FOL653 · XW4Z5C486AA · LS04014 · C2C18571 · C2D49528 · XR81692 · XW4Z5C486AB · SL24502 · K750340 · GS10813 · MS10813 · JTS541
This part cross-references / interchanges with the following part numbers:
What is a sway bar link and what does this part do?
A sway bar link (stabilizer bar link) connects the stabilizer bar to the suspension, transferring cornering loads to help control body roll. This TC1885 is the rear right link for the listed Jaguar applications.
Which vehicles does the Delphi TC1885 fit?
It fits many Jaguar models including the 2014-2022 F-TYPE, 2010-2019 XJ, 2009-2015 XF, 2007-2015 XK and XKR, plus the XJR in 2004-2009 and again 2014-2017. See the Buyer's Guide tab for the full list.
Which corner is this link for?
This is the rear right stabilizer bar link. For even, balanced handling, it's good practice to inspect and, if worn, replace the opposite side as well.
What are the signs a stabilizer bar link needs replacing?
Common signs include clunking or rattling over bumps and increased body lean in turns. Diagnose the cause first, since these symptoms can come from other worn suspension parts.
How is the Delphi TC1885 built for durability?
It uses ultrasonic molding to help prevent weld breakage, is fatigue tested to avoid failure, is machined to micron tolerances, and has anti-corrosion protection applied to each part.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.