The Delphi TC3424 rear sway bar link for the 2013-2020 Ford Fusion and other vehicles connects the rear sway bar to the suspension, so the bar can resist body roll as the car leans through turns.
- Draws on Delphi's OE steering expertise, with dimensional and material analysis for compatibility between the OE and aftermarket part
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- Made with ultrasonic molding to help prevent future weld breakage
- Fatigue tested to help avoid link failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti Corrosion protection applied to each part to fight corrosion and improve its appearance
A worn rear sway bar link can show up as a clunk or rattle from the rear over bumps, more body lean in corners or a loose feel at the rear. When the rear wheels are off for a tire or brake service, look over each link for cracks, rust or play at the joints. Worn bushings and other rear suspension parts can knock too, so pin down the source before you order.
It fits a wide range of Ford and Lincoln models, including the 2019-2020 Ford Police Responder Hybrid and the 2019-2020 Ford SSV Plug-In Hybrid. On cars that take two, this listing is one side, and the link on the other side of the rear axle is normally replaced at the same time. Driving a model not named here? Look up your own car under the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1 or 2, varies by vehicle
- Pieces per listing: 1
Build and materials
- Construction: ultrasonic molding
- Finish: Anti Corrosion protection
- Joint machining: micron tolerances
In the box: one rear sway bar link. The 2013-2020 Ford Fusion takes two, and the count varies by vehicle.
Interchange: DG9Z 5C486-A
DG9C5C486AXC · SL85775 · SL85775XL · K750744 · MS408118 · MS40898 · TXMS40898 · JTS1673
This part cross-references / interchanges with the following part numbers:
DG9C5C486AXC, DG9Z 5C486-A, SL85775, SL85775XL, K750744, MS408118, MS40898, TXMS40898, JTS1673
Frequently Asked Questions
Will the Delphi TC3424 fit the rear suspension of my 2013-2020 Ford Fusion?
Yes. The Delphi TC3424 is a rear sway bar link for the 2013-2020 Ford Fusion, which takes two.
Does this Delphi rear sway bar link fit the 2019-2020 Ford Police Responder Hybrid or 2019-2020 Ford SSV Plug-In Hybrid?
Yes. The Delphi TC3424 rear sway bar link fits both the 2019-2020 Ford Police Responder Hybrid and the 2019-2020 Ford SSV Plug-In Hybrid, one per vehicle; other models are in the "Vehicles it fits" section.
How is this Delphi stabilizer bar link built to resist weld breakage?
This rear sway bar link is made with ultrasonic molding to help prevent future weld breakage, and its joints are machined to micron tolerances for smooth operation.
What can a failing rear sway bar link sound or feel like?
A worn rear sway bar link can cause a clunk or rattle from the rear over bumps, extra body lean in corners, or a loose feel in the rear suspension.
How is the TC3424 sway bar link tested for heat, cold and salt?
This sway bar link is tested to withstand temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray, with Anti Corrosion protection on each part.
