Delphi TC4908 front sway bar link for the 2021-2026 Volkswagen ID.4 and other vehicles connects the sway bar to the suspension. Also called a stabilizer bar link, it helps limit body roll in corners.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- Ultrasonic molding to help prevent future weld breakage
- Each Delphi sway bar link is fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC4908 sway bar link
- Also called: stabilizer bar link
- Fits: 2021-2026 Volkswagen ID.4 and other vehicles
- Position: Front
- Condition: New
A clunk or rattle over bumps, or a loose feel in turns, can mean a worn link. Those signs alone do not prove the link is at fault, since a worn strut mount or bushing can make a similar noise. This listing is one link, and the 2021-2026 Volkswagen ID.4 takes two, so both front sides are normally replaced together.
Fits
The vehicles it fits include the 2021-2026 Volkswagen ID.4, the 2022-2026 Audi Q4 e-tron and the 2022-2026 Audi Q4 e-tron Sportback. If your car is not one of those, look up its year, make and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front
- Quantity per vehicle: 2
Build and materials
- Construction: ultrasonic molding
- Finish: anti-corrosion protection
- Condition: new
- Country of origin: Turkey
Interchange: 1EA 411 315 B · 1EA 411 315 C
KSLF4540 · MS708106 · X52SL0845
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
1EA 411 315 B, 1EA 411 315 C, KSLF4540, MS708106, X52SL0845
Frequently Asked Questions
Is the Delphi TC4908 the ID.4 sway bar link for a 2021-2026 Volkswagen ID.4?
Yes. Delphi TC4908 is a front sway bar link listed for the 2021-2026 Volkswagen ID.4. This listing is one link, and that car takes two.
Is the Delphi TC4908 a front or rear link?
Front. Delphi TC4908 is a front sway bar link, sold one per listing.
How can I tell if a sway bar link is worn?
A clunk or rattle over bumps, or a loose feel when turning, can mean a worn link. A shop can inspect the joints to confirm.
Why is the Delphi TC4908 made with ultrasonic molding?
Ultrasonic molding is used to help prevent future weld breakage. Delphi also machines its sway bar links to micron tolerances for durability and smooth joint operation.
Does the Delphi TC4908 replace number 1EA 411 315 B?
Yes. 1EA 411 315 B is one of the numbers Delphi TC4908 replaces; the others are on the Interchange line.
