Delphi TC4927 front sway bar link for the 2020-2026 Ford Explorer and other vehicles connects the sway bar to the suspension to limit body roll. Some catalogs list it as a stabilizer bar link.
- Ultrasonic molding to help prevent future weld breakage
- Delphi sway bar link is fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Withstands temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
Quick facts
- Part: Delphi TC4927 sway bar link
- Also called: stabilizer bar link
- Fits: 2020-2026 Ford Explorer and other vehicles
- Position: Front
- Condition: New
A worn link can show up as a clunk or rattle over bumps, or as extra body lean in corners. Other suspension parts can make similar noises, so with the car parked and the engine off, look at the front links for cracks, bends or heavy rust before you replace one. This listing is one link, and both front sides are normally replaced together.
Fits
It fits the 2020-2026 Ford Explorer and the 2020-2026 Ford Police Interceptor Utility, and each of them takes two, one for each front side.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Condition: New
- Corrosion protection: anti-corrosion protection on each part
- Country of origin: Turkey
Interchange: LB5C-3B438-AD · LB5Z-5K484-A
MS408131 · X15SL0772
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
LB5C-3B438-AD, LB5Z-5K484-A, MS408131, X15SL0772
Frequently Asked Questions
Is this a 2020-2026 Ford Explorer stabilizer link?
Yes. Delphi TC4927 is a front link that fits the 2020-2026 Ford Explorer and the 2020-2026 Ford Police Interceptor Utility.
Is this front sway bar link protected against corrosion?
Yes. Delphi applies anti-corrosion protection to each TC4927 link, and the parts are tested for 720 hours of salt spray.
How does this sway bar link guard against weld breakage?
It is made with ultrasonic molding to help prevent future weld breakage. Delphi also fatigue tests the link to avoid failure.
What noises can a worn front sway bar link make?
A worn link can cause a clunk or rattle over bumps or when turning, along with more body lean in corners. A shop can confirm which part is making the noise.
Does Delphi TC4927 replace LB5Z-5K484-A?
Yes. LB5Z-5K484-A is one of the other numbers Delphi TC4927 replaces; the Interchange line on this page lists the rest.
