Delphi TC5064 rear sway bar link for the 1990-1992 Audi 80 Quattro and other vehicles joins the rear sway bar to the suspension. It helps limit body roll in turns.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray
- Ultrasonic molding to help prevent future weld breakage
- Fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5064 sway bar link
- Also called: stabilizer bar link
- Fits: 1990-1992 Audi 80 Quattro and other vehicles
- Position: Rear
- Condition: New
A rattle or clunk over bumps, or extra body lean in corners, can mean a rear link is worn, and other suspension parts make similar noises. Before replacing it, look at the ends of the link for cracks, tears or looseness, and leave any under-car inspection to a shop. This listing is one link. The car takes two, one on each side of the rear axle, and both are normally replaced together.
Fits
It is a direct-fit replacement for the 1990-1992 Audi 80 Quattro, the 1990-1992 Audi 90 Quattro and the 1990-1991 Audi Coupe Quattro.
Specifications
- Position: Rear
- Quantity per vehicle: 2
- Condition: New
Interchange: 895505389 · K750405 · MS70854 · JTS284
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
895505389, K750405, MS70854, JTS284
Frequently Asked Questions
Will the Delphi TC5064 link fit a 1990-1992 Audi 90 Quattro?
Yes. Delphi TC5064 is a rear sway bar link that fits the 1990-1992 Audi 90 Quattro. The car takes two, one on each side of the rear axle.
Is this Delphi sway bar link fatigue tested?
Yes. Delphi fatigue tests its sway bar links to avoid failure, and this link is made with ultrasonic molding to help prevent future weld breakage.
Is a stabilizer bar link the same thing as a sway bar link?
Yes. Both names describe the same part, and Delphi TC5064 is made for the rear.
What temperature and salt exposure can this rear link handle?
It withstands temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Does Delphi TC5064 replace part number K750405?
Yes. K750405 is listed as an interchange number for Delphi TC5064, along with 895505389, MS70854 and JTS284.
