Tame body roll and quiet front-end rattles with the Delphi Suspension Stabilizer Bar Link TC5301, a front left sway bar link that ties the stabilizer bar to the suspension so both wheels work together through corners and over bumps. It's a direct-fit Ford Explorer sway bar link for the 2011-2019 Ford Explorer and 2013-2019 Ford Police Interceptor Utility — see the Buyer's Guide tab for engine-specific coverage.
Delphi builds this stabilizer bar link with the same OE safety technology fitted to millions of vehicles worldwide, testing to the extreme for OE performance: parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with extensive dimensional and material analysis for close OE-to-aftermarket compatibility.
Fatigue tested: validated to avoid premature failure.
Micron-tolerance machining: for durability and smooth joint operation.
Anti-corrosion protection: applied to each part for corrosion prevention and enhanced aesthetics.
A worn link often shows up as clunking or rattling over bumps and sloppy handling; if the original front left link is the cause, this replaces it. Sold individually — order two to renew both sides for balanced handling.
It connects the stabilizer (sway) bar to the suspension so both wheels respond together, helping control body roll through corners and over uneven roads.
Will this fit my Ford Explorer?
Yes, the TC5301 is a direct-fit front left sway bar link for the 2011-2019 Ford Explorer and 2013-2019 Ford Police Interceptor Utility. Check the Buyer's Guide tab for engine details.
Which position is the TC5301?
It is the front left sway bar link. It is sold individually, so order two if you want to replace both the left and right sides together.
What are the signs my sway bar link is worn?
Common signs include clunking or rattling over bumps and looser handling. Diagnose the cause first, since other suspension parts can produce similar noises.
How is this Delphi link built for durability?
It uses ultrasonic molding to help prevent weld breakage, is fatigue tested, is machined to micron tolerances for smooth joint operation, and has anti-corrosion protection applied to each part.
Keep your front sway bar tied to the suspension and tame body roll through the corners with the Delphi Suspension Stabilizer Bar Link TC2023. This front sway bar link connects the front sway bar to...
Quiet down that clunk and keep your stabilizer bar working with the Delphi Suspension Stabilizer Bar Link (TC2079) — a direct-fit Honda Civic sway bar link for the rear left position. It installs on...
Keep the Hyundai Santa Fe stabilizer bar working with the suspension to control body roll using the Delphi Suspension Stabilizer Bar Link TC1529. This sway bar link connects the stabilizer bar to the...
Keep the rear stabilizer bar working with the body of your Mitsubishi and tame sway through the corners with the Delphi Suspension Stabilizer Bar Link TC5498. This rear-position sway bar link ties...
Tighten up body roll and quiet down that front-end rattle with the Delphi Suspension Stabilizer Bar Link TC5547 — a direct-fit front left sway bar link and the exact part you're after when searching...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
